Login

RSS What is this?
Help Requests

Ice Maker




Can You Help With These Problems?

  • Posted by hensher7 on Sep 4th, 2008 at 12:28am

    No restart
    Ice maker won't re-start after shutting off on full bin. Requires reset to operate.
  • Posted by vatubeman on Sep 3rd, 2008 at 3:43pm

    does not shut off Makes too much ice
    The machine does not shut off after the ice bin is full. I think the bin thermistor may be bad.(WR55X10018) The specs I have calls for a resistance of 25.9-29.8K ohms. Since this is a temperature sensitve device, at what temp should I measure this? GE is of no help. I measure 12.5k @ 70F and 33.5K…
  • Posted by john.v.shaw on Sep 3rd, 2008 at 10:55am

    not making ice
    Compressor go on and off every 5 seconds
  • Posted by moderna on Sep 3rd, 2008 at 9:34am

    Water pump
    Please advise if you have outlets in Namibia or Swaziland as I am after a water pump for the above model Ice Maker. Perhaps you could quote me direct including shipping to Johannesburg South Africa
  • Posted by stephen_hofmann on Sep 1st, 2008 at 10:51am

    Ice is not forming
    I recently cleaned my GE icemaker and now when I turn it back on, ice is not forming. The ice maker does not seem to be getting cold enough. I followed the troubleshooting tips from the manual including cleaning the condensor and this does not seem to be working. Any other suggestions?
  • Posted by alex_wright_ab on Aug 31st, 2008 at 9:44pm

    makes no ice
    200 series icemaker stopped making ice, because it is not mkaing ice
  • Posted by ajsexkitten01 on Aug 29th, 2008 at 7:49pm

    manual required
    want 2 no how 2 drain the machine for cleaning
  • Posted by lgbttc on Aug 29th, 2008 at 2:29pm

    No ice
    Ice maker is making a clicking sound but not creating ice cubes
  • Posted by sebastianmiddecke1 on Aug 28th, 2008 at 3:45pm

    stuck in harvest
    I am working on a manitowoc model# QY0424A which is stuck in harvest mode. It heats the tray when water is running over it and cooling it when there is none running over it. When I turn it off it blinks twice indicting 3 times exceeding 3.5 min harvest cycle. Getting frusterated would appriciate som…
  • Posted by malmbergacres on Aug 28th, 2008 at 12:25pm

    Manual
    No manual
  • Posted by cjchuck64 on Aug 27th, 2008 at 8:54pm

    no ice
    head press 200 lowpress 0
  • Posted by kathyloftin43 on Aug 27th, 2008 at 8:53pm

    Paint Chips in Ice
    The evaporator on this model is not made from stainless and we have had the original replaced however we are atill experincing the same problem. After about 6-8 months the paint starts flaking off into the ice again. Can this part be replaced with a stainless steel evaparator?
  • Posted by tonehb1122 on Aug 27th, 2008 at 11:44am

    manual
    i cannot seem to find anything on a manitowoc gd0402a.. this is a ice machine. nor do they have anything on a g-400 series. if you could please send me some information regarding this product. Thank you!
  • Posted by hmatt on Aug 26th, 2008 at 11:05am

    over fill
    waterover fills icemaker
  • Posted by heatherhpowers on Aug 24th, 2008 at 3:48pm

    trying to hook up ice maker
    Need picture directions to install the ice maker to Kenmore Model number 59671852101
  • Posted by mmoxley11 on Aug 24th, 2008 at 11:24am

    Installation
    I need the installation manual for this product
  • Posted by Gabi on Aug 23rd, 2008 at 8:07am

    Noise
    i recently had the clr2060 with pump installed. The unit was making a high pitch noise every time the unit fills with water. I was told by a service tech that the water value was going bad. I ordered one and he replaced, noise still going on. I had the same tech out to fix a piece on a new range an…
  • Posted by charmingbadass1 on Aug 22nd, 2008 at 6:52pm

    cleaning info
    I need a manual for model number b570, I especially need the detailed cleaning instructions and information on where i can get the cleaning solutions
  • Posted by bhall124 on Aug 20th, 2008 at 5:21pm

    ice maker question
    I have a Kenmore side by side refridgerator/freezer model 363.58577892 serial #85029187. my original ice maker got stuck in the heat mode and was melting all the ice in the bin so I too the unit out and went to sears and got a new WR30x10093 ice maker to replace it. It nevermade ice. I then replace…
  • Posted by apupo on Aug 20th, 2008 at 12:13pm

    Manual
    Not operarating. Need the manual to see if it can be repaired .
  • Posted by aaichouni on Aug 20th, 2008 at 9:05am

    manual book
    manual book
  • Posted by echota on Aug 20th, 2008 at 8:30am

    installation trouble
    we went by the install instructions in the manual.but the red lights start flashing and the compressure stops running.
  • Posted by safe on Aug 19th, 2008 at 7:35pm

    how to prove freezer is still working
    My ED25RF refrigerator Freezer is not working but light is on. How I can do?
  • Posted by beru4546 on Aug 19th, 2008 at 6:04pm

    Sensor for FIM90
    Full ice sensor stays on (RED) even when there is no ice present. Need new sensor?
  • Posted by mike on Aug 19th, 2008 at 10:39am

    Leaking Ice maker
    I have water leaking around the bottom of the ice maker itself, the water leaks into the collector bin and clogs it with big frozen chunks
  • Posted by txwilson on Aug 19th, 2008 at 10:19am

    USER MANUAL
    NEED USER MANUAL
  • Posted by sueedelson on Aug 17th, 2008 at 7:08pm

    Need to Hook Up Ice Maker
    Need Instructions to Hook Up Ice Maker
  • Posted by candelamb on Aug 17th, 2008 at 4:20pm

    Type of freon
    Do not know what kind of freon is used in this machine.
  • Posted by rbeevs on Aug 15th, 2008 at 11:54pm

    dump vavle
    dump vavle will not close in ice or clean mode
  • Posted by hoffenglish on Aug 12th, 2008 at 7:35pm

    no water running through icemaker
    My icemaker is properly connected but all of a sudden no water is running through the icemaker. The water is connected.
  • Posted by carlllllisle on Aug 11th, 2008 at 9:08pm

    stale water in ice maker
    ice seems to have dark things floating and water doesn't taste good. How to clean water tubes? need manual
  • Posted by gthut1 on Aug 11th, 2008 at 2:20am

    problem w
    ice machine beeping and wont make ice
  • Posted by tbryan on Aug 10th, 2008 at 4:41pm

    cleaning
    need to know process for cleaning and appropriate dilution for cleaning solution
  • Posted by ssgsgsrs on Aug 10th, 2008 at 3:02pm

    water problem in refrig.
    water not turning off to ice maker when pluged in
  • Posted by chuck.mcintosh on Aug 10th, 2008 at 1:55am

    Not Enought Ice
    My ice maker doesn't produce enough ice, only about 2/lbs per day. Is there an adjustment that can be made?
  • Posted by jramit on Aug 9th, 2008 at 8:58pm

    manitowoc ice maker
    how do you remove the water pump
  • Posted by john_zastko on Aug 9th, 2008 at 1:23pm

    Mount on rear of refridge leaks
    THe black plastic connector leaks where it inserts into the internal water channel. The adhesive has been repalced but the black plastic coupler no longer achives a water tight seal. Is ther a remedy for this?
  • Posted by billyf on Aug 8th, 2008 at 8:27am

    Ice Maker problem
    Can not get a water valve to stay good. The unit keeps burning coil on water valve out. Voltage seems correct. Have tried several valves.
  • Posted by cvarner2 on Aug 7th, 2008 at 11:21pm

    problem with machine
    unit runs 2 minutes in freeze mode then goes into a early harvest cycle. machine has been cleaned to specs.
  • Posted by jlmarsjr on Aug 7th, 2008 at 9:48pm

    SMALL AMOUNT OF ICE
    My Ice maker only makes two or three ice cubes at a time. It seems there is not enough water in the unit. There is an adjusment screw on the side. How do use this adjustment to control the amount of water.
  • Posted by amilbourne on Aug 7th, 2008 at 2:53pm

    owners manual
    need manual
  • Posted by jdubbso517 on Aug 5th, 2008 at 12:16am

    how to set up ice maker
    i lost my manual so i need help setting up ice maker
  • Posted by mdchau on Aug 4th, 2008 at 12:51am

    Water Leak From Ice Maker
    Water seems to be leaking from the ice maker down to the bottom of the freezer and freezing at the inside base of the freezer.
  • Posted by clay.gary on Jul 31st, 2008 at 10:16am

    service manual
    left bin light remains on and
  • Posted by e715 on Jul 31st, 2008 at 7:01am

    leaks water
    leaks water
  • Posted by goertzen.tony on Jul 29th, 2008 at 10:04pm

    wiring
    wiring diagram
  • Posted by jasonaspinall on Jul 29th, 2008 at 1:47pm

    rangemaster icemaker
    my fridge/freezer is 6 months old,no ice is being made. however there is a water supply and the freezer temp is good..any suggetions? thanks
  • Posted by gary.scholzen on Jul 29th, 2008 at 11:52am

    wont keep running
    You can turn the icemaker on. It will make ice but then it will shut off and melt down. You need to restart it a couple times a day.
  • Posted by burdoo on Jul 29th, 2008 at 10:52am

    odd shape ice cubes
    making odd shape cubes -- some are OK --others are small --others are fragments--cannot get enough cubes to fill unit --keeps melting -- I have descaled--HELP, Burt
  • Posted by hesolutions on Jul 26th, 2008 at 8:39pm

    start capacitor and relay
    compressor hums trips thermal snap disc
  • Posted by jimwalker4 on Jul 26th, 2008 at 4:44pm

    cleaner
    Where to buy ice maker cleaner
  • Posted by cmunsart on Jul 26th, 2008 at 2:07pm

    ice
    we moved the metal bar that adjusts ice volume and now ir doesn't make ice at all. Bin is one large block that may be jamming everything.
  • Posted by jsr1954 on Jul 26th, 2008 at 12:01pm

    no ice
    have kenmore frig, water dispenser works, but ice maker not working. unit approx. 6 years old.
  • Posted by nwacheating on Jul 24th, 2008 at 2:39pm

    owners manual
    i need to find an owners manual, tells proper maintenance and cleaning
  • Posted by nwacheating on Jul 24th, 2008 at 2:30pm

    owners manual
    i need a owners manual
  • Posted by aparna on Jul 23rd, 2008 at 10:16am

    icebox
    need a new mother board
  • Posted by nealbaker3 on Jul 22nd, 2008 at 10:19pm

    Model year
    looking for date of production
  • Posted by anakatherine on Jul 21st, 2008 at 8:26am

    lock child
    the blocker , lock child is broken, i need to buy
  • Posted by scottanthonyperry on Jul 20th, 2008 at 12:10am

    troubleshooting
    not making ice
  • Posted by jajhames on Jul 18th, 2008 at 10:37am

    Parts Manual
    Looking for a complete parts manual
  • Posted by rtsamuels on Jul 16th, 2008 at 3:05pm

    parts supplier
    need a new purge valve
  • Posted by pendarvis7 on Jul 14th, 2008 at 6:12pm

    manual
    water overflowing
  • Posted by kaubain on Jul 12th, 2008 at 5:04pm

    cfcs3Aw3
    I am looking for a wiring diagram for a whirlpool ice maker.
  • Posted by scrrmm1208 on Jul 11th, 2008 at 2:00pm

    water overflowing in water pan melting ice
    i believe the water is coming in faster than it can drain when rinsing causing water to overflow in the front melting ice
  • Posted by d.gans on Jul 9th, 2008 at 8:32pm

    no ice
    timer seems to stop part way in cycle,I think maybe a relay or thermostat,
  • Posted by cbuskirk on Jun 29th, 2008 at 8:50pm

    ice maker
    ice maker don't work..
  • Posted by tdgriffin on Jun 27th, 2008 at 11:12pm

    ice maker will not work
    ice maker will not work
  • Posted by jandtariko on Jun 22nd, 2008 at 11:35am

    compressor ?
    the compressor won't come on ...do I need to start looking for another ice machine?
  • Posted by carl.carley on Jun 18th, 2008 at 6:52am

    broken ice maker
    looking for a schematic for a blizard 20 AGH326/IG ice maker, can you help?

    cheers

    carl
  • Posted by david on Jun 14th, 2008 at 4:17pm

    freon
    low of freon
  • Posted by lonnier4 on Jun 8th, 2008 at 3:50am

    ice maker
    Ice maker is not producing ice but is going through it's cycle. Acts like it is starved for water.
  • Posted by susan.smith8 on May 14th, 2008 at 10:47am

    require user manual
    lost user instructions/manual
  • Posted by coopavalon on Apr 25th, 2008 at 5:59pm

    Turn On
    Trying to turn on the icemaker after 6 months off. The power and water are on but after 3 hours, no ice. How long should it take for ice to begin?
  • Posted by shurrun1 on Apr 19th, 2008 at 8:37pm

    How to activate self clean
    I do not have user instructions. I would like to activate self clean mode and forget how to do it. Can someone please look up in their manual and let me know. Thanks
  • Posted by ahdrmd on Apr 3rd, 2008 at 10:51pm

    Whirlpool Referigerator and icemaker manufactured 5/2000
    trying to hook up icemaker and having problem. Thought it was alll hooked up and still no ice cubes. Referidgerator ET21LKXHW01, EK2035580. CAN YOU HELP ME? IT HAS BEEN A LONG TIME SINCE I LAST INSTALLED ONE.

Ask OwnerIQ Members for Help With A Problem

Let the OwnerIQ Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the OwnerIQ membership to view. You will be notified of responses by email. Required fields are in BOLD.


(optional)
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  

Recent Blog Posts


Register now to download manuals, solve product problems, read blogs and newsletters, and get a free personal homepage

Recent User Activity



OwnerIQ Network | Manufacturers | About | Research | Press