-
Posted by mssigur on May 25th, 2009 at 6:51pm
Lights flashing
I have two lights flashing on my dishwasher and my dishwash does not work. I turned the power off for 10 minutes and the lights are still flashing.
-
Posted by vivianesk on May 22nd, 2009 at 6:02pm
GE Monogram Dishwasher ZBD3500
I need to replace, it is 10 years old. What are the dimensions? I cannot locate in Use and Care Guide, that's all I have
-
Posted by nurserlj on May 22nd, 2009 at 5:03pm
control panel
control panel does not respond when any of the buttons are pressed
-
Posted by grrandmamaw2 on May 21st, 2009 at 2:33pm
GE DISHWASHER
DOOR IS HEAVY
-
Posted by michael_retsky on May 21st, 2009 at 11:02am
dishwasher flodding
my relatively new diswasher is flooding I unplugged it and plugged it back in and it seems to retain a pool of water in the bottom, but it still floods is it a sensor or electronic timer?
-
Posted by davidrshannon on Apr 11th, 2009 at 1:32pm
ringing noise
The dishwasher door was left open. A ringing noise started and now it will not stop. I have tried unplugging the dishwasher to reset and when it is plugged back in it starts ringing again.
-
Posted by labarbourmd on Apr 7th, 2009 at 10:24pm
DW won't turn on
The start button won't turn on even though the green lights are on for the heating/drying.
-
Posted by kntthomas on Apr 6th, 2009 at 5:59am
Soap Dispenser doesn't open during operation
For whatever reason, the soap dispenser doesn't open during operation. When I open the door to remove the dishes, the soap door pops open and the soap fall to the bottom of the unit. There has got to be an easy fix to this. Any suggestions?
-
Posted by bigcarter on Apr 2nd, 2009 at 11:03am
hard water?
My dishes are coming out with hard water or some kind of film all over them.Also,when I go to unload the dishes,water drains out of the spinner that's attached under the top rack.
-
Posted by hangarinn on Mar 21st, 2009 at 10:16pm
door handle
loose door handle
-
Posted by gralnek on Mar 9th, 2009 at 10:29am
GE monogram dishwasher ZBD 6880
Do I need to rinse the dishes before putting them into the dishwasher? If not, where do I find the filter which catches the debris so I can empty it.
-
Posted by packard.stevevn on Jan 25th, 2009 at 6:20pm
water leaking from bottom of door
The seel at the bottom of the door is torn and rotting, allowing water to leak onto the floor. I neead a new door seel.
-
Posted by nsblair on Jan 23rd, 2009 at 11:34am
reboot
How do I reboot the dishwasher. It seems to be frozen. A few lights on , but nothing works when I push them.
-
Posted by ekfaul on Jan 22nd, 2009 at 7:05pm
Motor
I heard older GE dish washer motors freeze up and you can spin the blades and get it working again. Can this model be fixed that way, the motor is in the back and I can't feel for a spot to reach for the motor blades to spin them.
-
Posted by samdesantis on Dec 28th, 2008 at 7:08pm
Water Drain
Water remains on bottom after cycle.
-
Posted by mykim725 on Dec 9th, 2008 at 12:55am
soapy residue on dishes
After dishwashing, there are still residual soap in the soap dispenser and some of the washed dishes have soap residues when operated under normal cycle mode. what could be wrong?
-
Posted by zachsgally on Nov 7th, 2008 at 5:17pm
install key pad
How do I install key pad
-
Posted by ctubbs on Nov 3rd, 2008 at 5:16pm
Water in the bottom
I have water at the bottom of each cycle.
-
Posted by lakellys on Oct 27th, 2008 at 3:39pm
not draining
after the dishwasher fills, it cycles then won't drain. It is blinking sani-wash.
-
Posted by kloraz on Oct 15th, 2008 at 2:40am
Not working
Dishwasher does turn on, some water runs inside, water gets warm/hot...but it is not cleaning dishes, soap dispenser opens but soap just dribbles down inside of door, water doesn't seem to be spraying or filling tub.
-
Posted by uu452t on Oct 12th, 2008 at 12:29pm
Failure to Discharge Water after cycle
Recently, the machine has not dicharged all of the water after the cycle. We usually set the cycle for normal wash and heated dry. There are at least 4-5 gallons of cloudy water at the base of the machine after the cycle. The dishes are not getting cleaned even though they are prewashed in before p…
-
Posted by rockd on Oct 3rd, 2008 at 5:43pm
won't turn on
hi, i can't get my dishwasher to turn on. i can navigate through the different wash options and heated dry option but when i push start the green light won't go and it won't start
-
Posted by swc4u on Sep 25th, 2008 at 2:12pm
OWNERS MANUAL
ROLLERS ON TOP TRAY FOR DISHWASHER ARE BROKEN AND NEED REPALCEMENTS
-
Posted by rkjd1 on Sep 23rd, 2008 at 11:34am
cleaning
We just moved in to our house and we have these nice appliances, but I don't know how to clean them properly. What cleaning method should I use. Thanks!
-
Posted by kittkat9 on Sep 15th, 2008 at 4:05pm
Use & Care
Use and care of this dishwasher, clean out the trap area
-
Posted by dseverns on Sep 8th, 2008 at 12:07pm
Replacement Parts
need replacement rollers
-
Posted by sbhugg on Aug 19th, 2008 at 3:36pm
No Power to Dishwasher
My diswasher suddenly has no power. Electric circuit is working as the breaker is on and the disposer on the same circuit is working.
We had a power outage in the area yesterday... power went off and on very quickly and then died. I wonder if the power outage impacted the unit, although the dishw…
-
Posted by bdietz on Aug 17th, 2008 at 5:40pm
Door Spring
I need to put the door spring back on
-
Posted by spychocyco on Aug 13th, 2008 at 12:46am
Will not drain completely
This dishwasher has worked well for 2 years, but has recently started leaving several inches of water in the bottom when the cycle is over. The pump appears to be working. It runs when it should, but only pumps part of the water out. I have checked the drain inside the dishwasher for obstructions. I…
-
Posted by soniamor1 on Jul 29th, 2008 at 3:04pm
Just bought used
It didn't come with a manual and I don't know where to put the rinse agent.
-
Posted by saretherford on Jul 16th, 2008 at 8:48pm
model number not listed
need replacement plastic dial knob
-
Posted by debmosier on Jul 13th, 2008 at 8:53pm
installation instructions
installation
-
Posted by doug on Jul 10th, 2008 at 11:40am
Motor Noise problem
This DW has been wonderful but is now almost 14 years old. It has developed a loud motor (pump) noise when running. It still works but as you know it is usually a very quiet machine. I need to fix it as any new ones would not match my front panel insert. I am a do it yourselfer. How hard is it to re…
-
Posted by ejbuzby on Jul 6th, 2008 at 2:09pm
Loose handle
The dishwasher handle is coming loose between the handle and the standoff that mounts on the front face. It appears that the handle can be re-tightened by removing the end cap on the handle, but i cannot seem to remove the cap.
Please advise how to re-tighten the handle.
Thanks in advance.
…
-
Posted by irishrose26 on Jul 5th, 2008 at 3:41pm
Loud Humming noise
Dishwasher suddenly making loud humming noise when emptying. Working fine, just very noisy. Have checked all the things suggested in the manual. Everything looks fine. Am at a loss - any other suggestions before I schedule a repair call? Thanks.
-
Posted by brianmadigan34 on Jul 3rd, 2008 at 8:32am
Water in bottom after last rinse
Excessive amounts (about 3/4 of an inch) of water stay in the bottom after the cycle is finished
-
Posted by lamar.willis on Jun 2nd, 2008 at 10:44pm
Incomplete draining
The dishwasher does not completely drain after the wash cycle. I understand some water should remain for seal lubrication, but this is nearly to the lip of the door.