-
Posted by sstandley on Nov 7th, 2009 at 12:34pm
Kenmore 665 dishwasher
Lock on feature will not respond to manual instructions to unlock
-
Posted by dhan8247 on Nov 2nd, 2009 at 8:03pm
manual downloaded how
How dod I get this manual downloaded?
-
Posted by msalmazol on Oct 26th, 2009 at 2:06am
Need user manual
I need a user manual for a Kenmore 18 inch portable dishwasher 578.1730590
-
Posted by ray_stcroix on Oct 25th, 2009 at 12:59pm
controller card
I have a kenmore quietguard with 2 burnt resistors R28 & R32. Does anybody know where I can get another card or if this is fixable
-
Posted by jkfe831 on Oct 22nd, 2009 at 5:19pm
manual
need the manual for a Kenmore dishwasher. model #206c1513p007
-
Posted by lynn.dishner on Oct 21st, 2009 at 11:37am
kenmore 665-16798791
We just bought this house & our dishwasher has recently quit, but I can't find a manual anywhere. We are not sure where to start for troubleshooting. Any help would be greatly appreciated!
-
Posted by wengland on Oct 21st, 2009 at 8:01am
665
When I finish washing I empty the tub out but the next day the tub is full of water and overflow on the floor from holes in right front bottom
-
Posted by nancycomc on Oct 19th, 2009 at 7:19pm
KENMORE DISHWASHER
I NEED TO TROUBLESHOOT GREEN LIGHT CANT WASH DISHES
-
Posted by nancycomc on Oct 19th, 2009 at 7:16pm
KENMORE DISHWASHER 66517033402
GREEN LIGHT WONT STOP FLASHING CANT WASH DISHES
-
Posted by nancycomc on Oct 19th, 2009 at 7:16pm
KENMORE DISHWASHER 66517033402
GREEN LIGHT WONT STOP FLASHING CANT WASH DISHES
-
Posted by nancycomc on Oct 19th, 2009 at 7:16pm
KENMORE DISHWASHER 66517033402
GREEN LIGHT WONT STOP FLASHING CANT WASH DISHES
-
Posted by thinktink6 on Oct 17th, 2009 at 6:34pm
latch replacement
How do I replace the latch on the inside of the dishwasher. I have the part. But it looks like I have to take apart the whole dishwasher.
-
Posted by eblair on Oct 15th, 2009 at 9:17pm
Dishwashe cycle lights
Why is the green clean light flashing?
-
Posted by james.b.cramp on Oct 14th, 2009 at 1:06pm
dishwasher M# 16791791
I have a 11 year old Kenmore dishwasher that gets so hot during the dry cycle that it has discolored all my non metalic cookware. You have to wait 10 minutes after the unit turns off to handle the dishes because they are so hot.
-
Posted by marymomcares on Oct 13th, 2009 at 6:28pm
kenmore dishwasher 665.17822000
it doesn't come on, you can cancel and drain, but the start button will not come on.
-
Posted by mjf71 on Oct 13th, 2009 at 10:40am
washing problems
dishwasher will not do the wash cycle, is it the motor. It does not make any noise it just wont wash and thats it
-
Posted by mjf71 on Oct 13th, 2009 at 10:40am
washing problems
dishwasher will not do the wash cycle, is it the motor. It does not make any noise it just wont wash and thats it
-
Posted by mjf71 on Oct 13th, 2009 at 10:39am
washing problems
dishwasher will not do the wash cycle, is it the motor. It does not make any noise it just wont wash and thats it
-
Posted by mjf71 on Oct 13th, 2009 at 10:39am
washing problems
dishwasher will not do the wash cycle, is it the motor. It does not make any noise it just wont wash and thats it
-
Posted by bfischer on Oct 13th, 2009 at 7:08am
Manual for 665-17801890
Does not drain
-
Posted by sarafitzgeraldwrites on Oct 11th, 2009 at 8:31pm
leaving soap on dishes
leaving soap on dishes
-
Posted by buffycat on Oct 11th, 2009 at 5:46pm
dishwqasher
makes a loud noise when in wash cycle how do you remove object from wash module
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:40pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:39pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:39pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by buffycat on Oct 11th, 2009 at 5:39pm
removing object from wash module
makes a loud noise when in wash cycle, nothing apparent in bottom of machine
-
Posted by chaffeefam6 on Oct 9th, 2009 at 5:05pm
will not start
The buttons light up but the machine will not start. I have not had any other problems with this machine before.
-
Posted by janis.curtis on Oct 8th, 2009 at 9:58am
dishwasher
where is the electrical plug in model # 665-17532201
-
Posted by janis.curtis on Oct 8th, 2009 at 9:58am
dishwasher
where is the electrical plug in model # 665-17532201
-
Posted by janis.curtis on Oct 8th, 2009 at 9:58am
dishwasher
where is the electrical plug in model # 665-17532201
-
Posted by gentry94 on Sep 30th, 2009 at 5:14pm
dishwasher model # 665-17024400
the cycles won't change or start
the 'clean' blue light keeps blinking
-
Posted by lauriej5456 on Sep 28th, 2009 at 6:59pm
Kenmore Dishwasher Owner Manual
Please help me find an owners manual for the Kenmore Dishwasher Model #1678581. Thanks!
-
Posted by ofarrell_patricia on Sep 27th, 2009 at 11:03pm
cycle will not advance
The cycle on my dishwasher will not advance. The water is plenty hot but machine will not cycle.
-
Posted by vickie.saulnier on Sep 26th, 2009 at 11:44am
Kenmore 665.1375 Dishwasher
Small plastic piece fell off inside our Dishwasher.
A small plastic piece fell off inside our Kenmore Ultra Wash DW, it looks like small circle with 2 chunks missing on two sides and hole in center. I can't figure out where it came from, please help. Thanks.
-
Posted by daviddube on Sep 22nd, 2009 at 2:10pm
Lock on light on
Lost manual can't get light off.
Can'r download one
-
Posted by stuart_gorner on Sep 17th, 2009 at 9:20pm
Model # of this dishwasher?
It's a Kenmore Ultra Wash Plus Quiet Pak built 1991. Need the Model # to get the manual. Can't see it anywhere on the machine.
-
Posted by leeannaspearson on Sep 16th, 2009 at 6:11pm
dishwasher lock
dishwasher lock is flashing and wont turn off how do i turn it off
-
Posted by geordiea on Sep 16th, 2009 at 11:01am
Lights Flash Will Not Start
This diswasher is a little over a year old. I started it yesterday and stopped it because I thought the noise it was making was a little off. I openned it to check that nothing was interfering with the spinning sprayer. Everything looked fine so i closed the door and tried to restart. A few of the l…
-
Posted by geordiea on Sep 16th, 2009 at 11:01am
Lights Flash Will Not Start
This diswasher is a little over a year old. I started it yesterday and stopped it because I thought the noise it was making was a little off. I openned it to check that nothing was interfering with the spinning sprayer. Everything looked fine so i closed the door and tried to restart. A few of the l…
-
Posted by geordiea on Sep 16th, 2009 at 11:00am
Lights Flash Will Not Start
This diswasher is a little over a year old. I started it yesterday and stopped it because I thought the noise it was making was a little off. I openned it to check that nothing was interfering with the spinning sprayer. Everything looked fine so i closed the door and tried to restart. A few of the l…
-
Posted by geordiea on Sep 16th, 2009 at 11:00am
Lights Flash Will Not Start
This diswasher is a little over a year old. I started it yesterday and stopped it because I thought the noise it was making was a little off. I openned it to check that nothing was interfering with the spinning sprayer. Everything looked fine so i closed the door and tried to restart. A few of the l…
-
Posted by mjmclaughlin on Sep 15th, 2009 at 9:06pm
reset code
what is rteset code for Kenmore ultrawash 66513742k601
-
Posted by mjmclaughlin on Sep 15th, 2009 at 9:06pm
reset code
what is rteset code for Kenmore ultrawash 66513742k601
-
Posted by denahunter on Sep 13th, 2009 at 3:24pm
dishwasher
My dishwasher will not drain all of the water when the cycle is finished. Last cycle the water was very dirty. Any suggestions?
-
Posted by randyb31 on Sep 13th, 2009 at 2:47pm
dishwasher
I neeed to know the size of this dishwasher because I want to buy a new one and I need the size of this one to see what size i need to buy
-
Posted by randyb31 on Sep 13th, 2009 at 2:47pm
dishwasher
I neeed to know the size of this dishwasher because I want to buy a new one and I need the size of this one to see what size i need to buy
-
Posted by randyb31 on Sep 13th, 2009 at 2:47pm
dishwasher
I neeed to know the size of this dishwasher because I want to buy a new one and I need the size of this one to see what size i need to buy
-
Posted by randyb31 on Sep 13th, 2009 at 2:47pm
dishwasher
I neeed to know the size of this dishwasher because I want to buy a new one and I need the size of this one to see what size i need to buy
-
Posted by randyb31 on Sep 13th, 2009 at 2:47pm
dishwasher
I neeed to know the size of this dishwasher because I want to buy a new one and I need the size of this one to see what size i need to buy
-
Posted by randyb31 on Sep 13th, 2009 at 2:47pm
dishwasher
I neeed to know the size of this dishwasher because I want to buy a new one and I need the size of this one to see what size i need to buy
-
Posted by grnwdgreenie on Sep 11th, 2009 at 11:38pm
dishwasher
how to remove top rack
-
Posted by janettudor on Sep 1st, 2009 at 10:49pm
Rinse Aid tube is clogged
I use Jet Dry rinse aid. Lately I have been noticing that the dishes are coming out filmy. My rinse aid window has been for for over a month. It should be almost empty by now. I believe the tube may be clogged, but I am not sure.
-
Posted by swede75 on Aug 31st, 2009 at 9:28pm
Lock on light keeps flashing
Need to understand what this means and what the problem is. Does someone have the users manual with the diagnostic information.
-
Posted by rolandtracie on Aug 30th, 2009 at 9:22pm
lock light is on and I don't know how to turn it off
The lock light is on and I don't know how to turn it off
-
Posted by anglukhard on Aug 30th, 2009 at 2:46pm
Small plastic piece fell off inside our Dishwasher.
8/31/09 A small plastic piece fell off inside our Kenmore Ultra Wash DW, number on part is 3379329 (looks like small circle with 2 chunks missing on two sides and hole in center) I can figure out where it came from, please help. Thanks. Angie Lukhard
-
Posted by gprest on Aug 30th, 2009 at 7:36am
manual
I would like to find a manual
-
Posted by trudy on Aug 28th, 2009 at 7:12pm
Install toe panel and kick plate
The above parts were not with the dishwasher when it was installed. Is there a diagram that would show me how to install the parts? fter 2 weeks and many phone calls, I cannot get anyone out here to install them.
-
Posted by mikedamiani on Aug 28th, 2009 at 3:04am
circuit board
The circuit board in the door is cooked. I found the problem, now I need to find a good source for the the best price for parts.
-
Posted by pmamonoff on Aug 27th, 2009 at 4:59pm
Page not opening
I have a Kenmore Ultra Wash 665.17772990 ser#FK2242425 stock #17772 I would appreciate any manual theat is close maybe do to the problem you could check and help if it needs to be to my email is: pmamonoff@yahoo.com Thanks for your time, Paul
-
Posted by fbengin1 on Aug 27th, 2009 at 11:09am
Is there a draw show the door makeup of a for a Ultra Wash Model 665.16493300
When door is open the is no resistance to slow down the opening.
-
Posted by treason20 on Aug 26th, 2009 at 7:18pm
kenmore ultra wash
Isn't cleaning dishes at all -
-
Posted by wpmw62 on Aug 26th, 2009 at 2:27pm
Dishwasher will not drain
I need a diagram of the drainage system to unplug the washer
-
Posted by maryjojohn on Aug 26th, 2009 at 1:36pm
dishwasher will not power on
dishwasher will not power on. what can be the problem. It had a PF error..but now the display is blank and can't power off or on.
maryjojohn@hotmail.com
-
Posted by maryjojohn on Aug 26th, 2009 at 1:36pm
dishwasher will not power on
dishwasher will not power on. what can be the problem. It had a PF error..but now the display is blank and can't power off or on.
maryjojohn@hotmail.com
-
Posted by tjuzwik on Aug 25th, 2009 at 8:10pm
dirty glasses
my glasses and flat ware do not seem to be getting clean. this dishwasher was in the house when I purchased and no manual was left behind. i have never had a dishwasher before so I dont know if i am using it correctly.
-
Posted by tjuzwik on Aug 25th, 2009 at 8:10pm
dirty glasses
my glasses and flat ware do not seem to be getting clean. this dishwasher was in the house when I purchased and no manual was left behind. i have never had a dishwasher before so I dont know if i am using it correctly.
-
Posted by tjuzwik on Aug 25th, 2009 at 8:10pm
dirty glasses
my glasses and flat ware do not seem to be getting clean. this dishwasher was in the house when I purchased and no manual was left behind. i have never had a dishwasher before so I dont know if i am using it correctly.
-
Posted by wpwjek on Aug 23rd, 2009 at 8:23pm
Will not complet cycle. 24 in. dish washer
The machine will not complet a cycle. After the third rince the china wash light will come on and the cycle will stop. The lock light will come on and will not reset.
-
Posted by goliver11 on Aug 23rd, 2009 at 8:05pm
Energy Star ?
Kenmore 665-16032401dishwasher : Is thhis rated as enery star??
-
Posted by goliver11 on Aug 23rd, 2009 at 8:01pm
Energy Star??
Is this model an Energy Star rated unit?
-
Posted by goliver11 on Aug 23rd, 2009 at 8:01pm
Energy Star??
Is this model an Energy Star rated unit?
-
Posted by fred.48 on Aug 22nd, 2009 at 9:41pm
dishwasher conversion kits
i wish to get a conversion kid for a 665.17722000 kenmore dishwasher
-
Posted by fredvon3 on Aug 22nd, 2009 at 7:21pm
help
display reads E2
-
Posted by borocrawfords on Aug 22nd, 2009 at 5:46pm
lower rack nozzle broke
the lower nozzles that spin are loose and the nob on the top of the assembly is barley hanging on by a thread. dishes do not clean entirely
-
Posted by buddha_bopper on Aug 19th, 2009 at 12:22am
dishwasher wont drain
one of the washes was interrupted mid cycle and now does not want to complete cycle by draining. I hear clicking like a relay is trying to engage but no other noises.
-
Posted by zyu99 on Aug 19th, 2009 at 12:10am
Menu of Kenmore Dishwasher 1389
I'm looking for instalation menu of Kenmore Dishwasher 1389. Please help. Thanks
-
Posted by lencord60 on Aug 18th, 2009 at 10:11pm
dishwasher noises
this dishwasher is making horrible, loud noises, AND the door is extremely squeaky, even after lubing the hinges.
any ideas? THANKS!
-
Posted by d123mac on Aug 17th, 2009 at 5:26pm
kenmore dishwasher 665.16933000
when i press a function button the minutes come on, but when i press start the numbers are replaced by two dash marks and nothing happens, what could be wrong ?
-
Posted by perstare on Aug 15th, 2009 at 1:33pm
Matching panel
I now have a Kenmore Model 15821 Dishwasher. I will replace it with a Kenmore Model 13882. Will the custom panel in my old Kenmore fit the space in my new Kenmore?
Mike B
perstare@promail.com
-
Posted by nbteacher on Aug 14th, 2009 at 7:22pm
kenmore dishwasher
how do I remove the bottom front panel to check float fuse
-
Posted by floretalamantes on Aug 13th, 2009 at 3:13pm
manual de usuario
nunca e usado un aparato y mi casa tiene este modelo 665 166 3591
-
Posted by dhgies on Aug 10th, 2009 at 7:07pm
Kenmore Dishwasher 665 serial:15831791
is there a "float", water doesn't completely drain out
-
Posted by fuzzjames on Aug 10th, 2009 at 12:42pm
drain
standing water in bottom
-
Posted by krs on Aug 9th, 2009 at 10:45pm
dishwasher full of water
dishwasher is full of water and the normal wash light is flashing as well as the drying light when I hit the cancel button and the when I hit the resume button the same thing happens? Please help me!
-
Posted by mary on Aug 9th, 2009 at 10:24am
dishwasher
will not turn on
-
Posted by tomski0 on Aug 8th, 2009 at 4:04pm
Kenmore dishwasher 655 16882000
Timer starts @ 9 counts down to 0 then says complete. Cycle never starts
-
Posted by drivnkids4fun on Aug 3rd, 2009 at 12:02am
no water to dishwasher
i have a kenmore ultra wash older modle portable. modle num 655-17799992 and there is no water getting to the washer any ideas?
-
Posted by drivnkids4fun on Aug 3rd, 2009 at 12:02am
no water to dishwasher
i have a kenmore ultra wash older modle portable. modle num 655-17799992 and there is no water getting to the washer any ideas?