-
Posted by amanoogian on Nov 5th, 2009 at 5:27pm
merit plus #mpldv-40
What is the proper order of installation for the log, rock and the powder. Powder on top of rock ? Rock on top of powder ? Rock under all logs, covering the burner ?
Thank you in advance for your help. Adam M.
-
Posted by hansenrl on Nov 1st, 2009 at 8:38pm
LP gas
Can this unit be set up for lp gas, if so now?
-
Posted by jimandlynn83 on Oct 16th, 2009 at 11:22pm
how do you start it
we bought a house with a lennox elite fireplace and we can't get it to start can you help
-
Posted by rschlicht50 on Oct 14th, 2009 at 6:51pm
gas fireplace manual
I have a CFM Harris gas fireplace. Model# UVHL24MP, I am looking for a manual for this product.
Thanks for your help
-
Posted by bbloss4 on Oct 12th, 2009 at 5:54am
need manual
what are the demnsions of this stove
-
Posted by bbloss4 on Oct 12th, 2009 at 5:54am
need manual
what are the demnsions of this stove
-
Posted by bbloss4 on Oct 12th, 2009 at 5:54am
need manual
what are the demnsions of this stove
-
Posted by tecbuilt on Oct 11th, 2009 at 6:22pm
No flame
Pilot lights, Main burner does not.
Gap is set to 1/16"... all connections are solid to control valve.
-
Posted by tombeal on Oct 5th, 2009 at 7:57pm
Pilot light
I cannot get my pilot light lit
-
Posted by tombeal on Oct 5th, 2009 at 7:56pm
Pilot light
I cannot get my pilot light lit
-
Posted by tombeal on Oct 5th, 2009 at 7:56pm
Pilot light
I cannot get my pilot light lit
-
Posted by tombeal on Oct 5th, 2009 at 7:56pm
Pilot light
I cannot get my pilot light lit
-
Posted by dallin on Jun 9th, 2009 at 4:11pm
Removing & Cleaning Glass
How to remove glass for cleaning
-
Posted by unionjack on Apr 10th, 2009 at 3:06pm
no heat
furnace runs but doesnt put out any heat. Replaced therostat.
-
Posted by stegne1951 on Feb 5th, 2009 at 12:28pm
pilot will not stay lit
Pilot goes on but vhen turn to position on flame goes out.
-
Posted by aastrella on Jan 29th, 2009 at 6:07pm
Manual
Need one!
-
Posted by iainmacdonald524 on Jan 26th, 2009 at 1:49pm
coals
i have cleaned the fire but when i replaced the coals the fire seems to be burning at one side only
-
Posted by nickplaster on Jan 20th, 2009 at 11:53am
pellet stove shuttiing down
pellet stove runs for two or three munites then shuts down. some time it will run for ten to twenty munites then shuts off
-
Posted by jmar on Jan 19th, 2009 at 6:19pm
The Earth Stove
Bought the Earth Stove in late '70s. Need a replacement for the bi-metalic coil that regulates the draft. Would also like a manual and parts list.
-
Posted by don on Jan 16th, 2009 at 10:22pm
Vents on top of unit
Are the two insulated openable vents on the top surfac of the unit to be opened to allow more heat out?
-
Posted by dkp1935 on Jan 8th, 2009 at 5:42pm
parts list manual
drive motor for auger keeps failing.stripped drive gear
-
Posted by dkhall_26 on Jan 5th, 2009 at 7:09pm
old earthstove not working
My earthstove HP40 Just stopped working. The fan still works, but the auger, blower fans and burners are not. I put a new fuse in. Still not working. I really need a manual.
-
Posted by obrian069 on Jan 1st, 2009 at 8:03pm
looking for the manual
stove will not feed itself have to push start button to feed
-
Posted by donnanip on Dec 28th, 2008 at 8:21pm
MPD3530CNM glass cleaning
How do I open and clean the inside glass on my Lennox vented gas fireplace?
-
Posted by verihaze on Dec 23rd, 2008 at 11:19pm
replace igniter
need location on to to replace igniterr
-
Posted by sharon on Dec 10th, 2008 at 12:56am
operation
the correct way to start it and how to keep it going. Our stove keeps going out when we turn down the hopper feed to low
-
Posted by drosenberry on Nov 25th, 2008 at 5:19pm
thermostat heater control
pyromaster p/n 10004199
-
Posted by tboenterprises on Nov 18th, 2008 at 6:55pm
can't ignite pilote light
can't ignite pilot light
-
Posted by brian on Oct 3rd, 2008 at 9:17pm
Thermocouple needs to be replaced
How do you replace your Thermocouple. Once I took everything apart it looks like the Thermocouple is welded to the line or does it disconnect but I can't see Where??
Brian