-
Posted by ysbarboza on Nov 7th, 2009 at 12:18am
MAYTAG MICROWAVE MMV5156AAW
When OFF, FAN IS HIGH, WHEN LOW or OFF fan is "LOW" will not shut off!
-
Posted by prsprd2 on Oct 28th, 2009 at 11:08am
fuse location
where is fuse on UMC5100ad
-
Posted by commander1255 on Oct 25th, 2009 at 5:49pm
microwave
quit working completely after being ran empty. Is it a fuse.
-
Posted by commander1255 on Oct 25th, 2009 at 5:13pm
mmv5207aa/ac microwave
In was ran with nothing in it and it quit completely. Nothing is working. Is it a fuse
-
Posted by jencoles0715 on Oct 25th, 2009 at 4:59pm
microwave
every time we push a time and start on our microwave it shuts off. so we clear it and do it again. and shuts off. we repeat untill it starts and stays on for the alotted time. what do i do?
-
Posted by gseye on Oct 20th, 2009 at 9:15am
installation bracket
I have a used MMV4205AAW that did not come with the mounting bracket. I looked up the part and it looks like it is the same size as the entire unit. I called an appliance place and they said they don't have one listed. Do I need a bracket or just the hardware?
-
Posted by toddrn on Oct 17th, 2009 at 1:44pm
mmv5207bas
burned out light bulb
-
Posted by seay2003 on Oct 7th, 2009 at 4:30pm
installation
I am looking for a installation manual for a maytag MMV 4205 BA not the use & care guide. can you help me?
-
Posted by aliskay on Oct 4th, 2009 at 5:05pm
Manual
maytag V5100AAQ, I would appreciate if someone could f=upload this maunual
-
Posted by aliskay on Oct 4th, 2009 at 4:57pm
maytag MMV5100AAQ
I need the manual for this microwave
-
Posted by louisealishia on Oct 4th, 2009 at 10:14am
MMV1153BAB Maytag Microwave keypad not working
The key pad on the microwave is not working. The light works. It has numbers on the screen
-
Posted by dkdentist on Sep 17th, 2009 at 7:14pm
Micrwave Door Handle
How to change Door Handle
-
Posted by crcowell on Sep 16th, 2009 at 10:41pm
Doesn't heat
Everything else works (turntable, clock, fan, etc) but food doesn't warm
-
Posted by deanbkd on Sep 14th, 2009 at 12:14pm
deanbkd@yahoo .com
microwave stays on but would not heat till you time it and start after time it will keep on just the table i think need a door switchplease reply at deanbkd@yahoo.com
-
Posted by deanbkd on Sep 14th, 2009 at 12:14pm
deanbkd@yahoo .com
microwave stays on but would not heat till you time it and start after time it will keep on just the table i think need a door switchplease reply at deanbkd@yahoo.com
-
Posted by pchin45 on Sep 6th, 2009 at 4:58pm
microwave wont shut off
i just finished using my microwave to cook for 30 minutes and now it wont shut off
-
Posted by cleds103 on Sep 3rd, 2009 at 12:57pm
Matag microwave model MMV4205AAS
circuit board has gone out for the second time. First time was under warranty and was fixed.This time I got the part from Maytag but too expensive to have it installed. Need repair manual. Good with electronics
-
Posted by msbueno on Sep 2nd, 2009 at 5:54pm
need specs for maytag mmv5100aas
i really need the info on this microwave like the price, specs, etc
-
Posted by canna1967 on Aug 19th, 2009 at 9:45pm
Crap Microwav
This MIcrowave was purchased in Jan 2007 and the paint inside the door peeled and shot the circuit board. I had warranty on it and they wont do anything for me. Way to go Maytag!!!! My flipping house is Maytag..... Do I buy anymore from you??? Maybe not!!! You wont even try to replace the door. Th…
-
Posted by bmoncure on Aug 16th, 2009 at 10:03am
how to change the light
Change light in a maytag microwave oven
-
Posted by bmoncure on Aug 16th, 2009 at 9:58am
how to change the light
maytag umc5200bab/w/s how to replace the light bulb
-
Posted by ldyjane1006 on Aug 16th, 2009 at 8:05am
how to set power level
need to set power level maytag mmv5100 AAB model
-
Posted by slehlert on Aug 9th, 2009 at 7:10pm
Making it vent to outside
We want to find the part for changing the venting system to outside. What is the part number and where can we buy it?
-
Posted by hnc1980 on Aug 9th, 2009 at 1:34pm
lightbulb install
how do i get to the bulb in the oven
-
Posted by kamondak on Aug 8th, 2009 at 11:48pm
MAYTAG MMV5100AAQ
Turntable has stopped turning, making a noise like a stripped gear? where can I get a manual and replacement parts
-
Posted by dallasbagley on Aug 5th, 2009 at 11:00pm
No power
Opened door , when I shut it the pad was blank and there was no power.
-
Posted by dharrington5 on Aug 4th, 2009 at 4:55pm
went dead
I have power to the microwave but there is nothing working. No light, no power or anything else.
-
Posted by brutrain on Jul 24th, 2009 at 8:19pm
Maytag Microwave Oven MMV5186AA
Cannot stop beeping sound even when
I disconnect power! Ido not have a schematic dwg for it; I assume there must be a battery somewhere in the unit.
-
Posted by havok4dr on Jul 2nd, 2009 at 7:32pm
help
mmv5000bvd
cant figure out to turn power to 50% power
-
Posted by rocarr209 on Jun 22nd, 2009 at 8:55pm
Light bulb
I need help replacing the internal light bulb of the microwave. I can not find it! Can you help me!
-
Posted by watsond52 on Jun 17th, 2009 at 10:53pm
maytag microwave model mmv4205bas
just stopped heating
-
Posted by butchfinlon on Jun 13th, 2009 at 1:32pm
Magtag Micro wave oven model #MMV5207BAQ
How to access the light bulb for changing
-
Posted by djewett on Jun 11th, 2009 at 8:43pm
installation of microwave
I am reinstalling a Maytag microwave MMV5000BAW and need two templates to complete the job.
I need the Top Cabinet Template and the Wall Template.
-
Posted by patsypoo05 on Jun 7th, 2009 at 4:11pm
MMV4205BAQ Microwave
Everything seems to be working fine but it won't heat/cook the food.
-
Posted by terry on Jun 2nd, 2009 at 4:35pm
Maytag MWOven MMV5000BDW
How many fee can the duct run from the appliance? 1. direct
2. with two elbows
-
Posted by candlemami on Jun 1st, 2009 at 5:16pm
not heating food
everything works fine on microwave , but its not heating food.
-
Posted by gnisbet on May 31st, 2009 at 6:42pm
Maytag MMV1153AAW Microwave Oven
I have a Maytag MMV1153AAW Microwave Oven and it no longer heats on any setting. It is about three years old and has worked fine to this point. It is also making a loud noise occasionally when in operation. Please Help.
-
Posted by pclink01 on May 29th, 2009 at 11:02pm
maytag umc5100adw microwave
burns fuse in 2 seconds when operated. any ideas? -thanks!
-
Posted by mdtx281 on May 9th, 2009 at 5:25pm
replace this microwave
need to replace microwave model UMC5100ADW with a similar one
-
Posted by mrobhop4 on Apr 23rd, 2009 at 7:20pm
WENT TO CHANGE LIGHTBULB SHUT OFF AND COULDN'T RESTART
WE CHANGED THE BULB AND THE MICROWAVE SHUT OFF AND WE CAN'T RESTART IT... IS THERE AN RESTART BUTTON?
-
Posted by rpontin on Apr 23rd, 2009 at 9:14am
Microwave MMV5207BASDoor handle
Where can I get a door handle for a Maytag Microwave MMV5207BAS.
-
Posted by rknepper110191mi on Apr 20th, 2009 at 1:58pm
Touch Control
The touch panel is failing to respond at times. Could you provide service instructions? I would like to replace the touch pad film.
-
Posted by jakieljake on Apr 8th, 2009 at 9:07am
Won't heat anything up
My microwave will not heat anything up no matter what setting it is on?
-
Posted by margaret_finan on Apr 6th, 2009 at 12:25pm
burning food
I have tried popping microwave popcorn several times and before it all pops, the bag burns, as does the few kernals that do pop.
-
Posted by mansfis on Apr 4th, 2009 at 9:23pm
snaped a piece of plastic
Broke the lower clip that latches the door closed.
-
Posted by jmillerdesigns on Mar 30th, 2009 at 1:16am
stopped working
fuse location
-
Posted by frogieprincess55 on Mar 29th, 2009 at 7:48pm
The microwave will not respond
the microwave will not respond when we touch the buttons. The screen says L. the light does turn on hen we open the door.
-
Posted by kreneek65 on Mar 28th, 2009 at 9:21am
Will not heat
The mircrowave works, but it does have a different running sound that normal, it will not heat/cook anything. Is there anything I can do to fix this problem on my own or do I need to call for a repair? Thank you, Renee
-
Posted by dede_danielle on Mar 27th, 2009 at 11:44am
Need help on fixing microwave
Turns on but will not heat food.
-
Posted by jlgodshall on Mar 18th, 2009 at 11:39am
went dead
shut down - no lights/nothing
-
Posted by satamara on Mar 8th, 2009 at 10:36pm
MMC50000ADW
I need MMC5000ADW Maytag microwave
specfications
i.e capacity, width, height, depth
Please help send this information ASAP.
thanks in advance,
SAT
-
Posted by blilley on Mar 3rd, 2009 at 12:36pm
Samsung videoplus crystal playback (ipc) VHS HQ PAL
Need operating manual
-
Posted by dsmith on Feb 17th, 2009 at 3:18pm
Adjust hot temp drinking water
Whirlpool WHKMD10 drinking water dispenser
Would like to adjust hot temp side
-
Posted by pdroman on Feb 16th, 2009 at 12:29pm
inside light replacement
Microwave - how to change inside light bulb
-
Posted by susanphoover06 on Feb 14th, 2009 at 2:48pm
microwave not heating food
all other features seem to be operatining on unit but no heat. there is a little microwave lit up on the control panel that was not there before.
-
Posted by akafrancis22 on Feb 4th, 2009 at 4:24pm
Fan/Exhaust
My micro is attached to the bottom of a shelf above the oven. The exhaust fan blows out the top directly into your face, into the kitchen. Can this fan be turned and made to blow out the top so I can exhaust out of the house???
-
Posted by info on Jan 27th, 2009 at 4:02pm
Internal Computer
The timer in my 2 year-old maytag microwave runs faster than normal. For example, if I try to run it for a quick minute, it runs for about 10 seconds. Technician came and said it is the internal computer. Anybody had the same experience?
-
Posted by suedan11 on Jan 24th, 2009 at 10:17pm
)wner's Manual
Need A Manual
-
Posted by zeeb52 on Jan 24th, 2009 at 9:02pm
Troubleshooting
Will only heat for a few minutes, then shuts off.
-
Posted by monteleoneb on Jan 20th, 2009 at 7:50pm
Handle Replacement
How do I access the door handle parts so that I replace the handle? I need access to the interior of the door and I don't know how.
-
Posted by janiezu on Jan 11th, 2009 at 10:34pm
template
need a template to install oven
-
Posted by sbcothren on Jan 10th, 2009 at 9:42pm
turntable
Turntable stopped turning.
-
Posted by jat961 on Jan 10th, 2009 at 2:33pm
how to uninstall
how to uninstall
-
Posted by pvlmnt on Jan 10th, 2009 at 10:20am
Code
I need to find out how to set the code on this security system
-
Posted by grover002 on Jan 7th, 2009 at 1:51pm
sending photos
can you tell me the setting for sending photos i em on orange and virgin and how to put the settings in, also how to put games on. thanks
Bev
-
Posted by pryan8064 on Jan 4th, 2009 at 10:59am
no light and turntable does not move
All of the sudden, when running the microwave, the inner light does not come on and the turntable does not move. Any ideas on how to fix? Is it just in need of a bulb replacement, and, if so, how do I replace it.
-
Posted by bigflea2 on Dec 8th, 2008 at 10:24am
repair
door latch
-
Posted by jflinn on Dec 2nd, 2008 at 9:06am
Not Heating
Our microwave runs but it is not heating and is very loud when it is run. Does anyone know what may be wrong?
-
Posted by kimberlyanthony on Nov 30th, 2008 at 8:16pm
Change bulb
How do we change the bulb in this built in?
-
Posted by weibzhou on Nov 30th, 2008 at 6:44pm
repair help
plastic roof inside the microwave is melted. Now it has a hole inside with black stuff falling out
-
Posted by farhonda on Nov 29th, 2008 at 10:28am
Need a manual for MAYTAG microwave MMV5156AAQ
questions regarding installation
-
Posted by kareneeliza on Nov 28th, 2008 at 12:21pm
maytag 5100
heat does not work
-
Posted by tiffanylmcnair on Nov 27th, 2008 at 10:48am
Will not heat
Just installed yesterday. Has dedicated 20 amp breaker. Everything seems to work, but nothing will heat on any setting.
-
Posted by elwinmoseman on Nov 24th, 2008 at 7:22pm
installation
needs to be installed
-
Posted by slyproductions on Nov 22nd, 2008 at 4:56pm
repalcement of microwave
how to uninstall
-
Posted by squirrleyb1too on Nov 10th, 2008 at 8:44pm
my unit shut down
I can't see how the filters fit and have no manual. I took out filters and it seems fine. Please help
-
Posted by krsmith6754 on Nov 4th, 2008 at 8:04am
instillation
How do you install the microwave to the cabinets
-
Posted by wemorrisje on Nov 2nd, 2008 at 9:34am
inside light
how do i get the round panel off inide microwave to replace insidelight?
-
Posted by sreevi12 on Oct 28th, 2008 at 3:43pm
Not heating
When I try to warm/heat anything in the microwave, it seems as if everything is working except it does not heat anything. The contents are ice cold as before.
-
Posted by rondapearce on Oct 25th, 2008 at 10:39am
Quit Working
All of a sudden this morning I went to heat up a cup of coffee and punched in the time and the microwave turned off. Won't work. Mfg Date is 11/05
-
Posted by onekrules on Oct 20th, 2008 at 12:36pm
owners manual
the controls aren't working
-
Posted by lindamc on Oct 19th, 2008 at 2:35pm
Spefications
Spefications
-
Posted by ajmariella on Oct 17th, 2008 at 6:25pm
Install Charcoal Filter
I need to install a new charcoal filter how do I do it ?
-
Posted by brianstovall on Oct 17th, 2008 at 5:57pm
Leaking Maytag Washer
I have a Maytag A612 washing machine that is around 20 years old & it has started leaking just above the transmission. Is this worth fixing or not? How big of a job is it to fix???
-
Posted by gil_borges on Oct 16th, 2008 at 11:23am
Microwave Locked
the microwave digital window has a "locked" display on its digital window & the microwave has no functionality. How do I return it to full functionality
-
Posted by plynn8 on Oct 15th, 2008 at 3:01pm
Reduce power on Microwave
I would just like to reduce the power level on my microwave oven. I did not get a manual.
-
Posted by opfar on Oct 13th, 2008 at 11:53am
turntable/light failure
my over the range mocro. turntable/light has quit. microwave part works and seperate hood fan works. is it a fuse?
-
Posted by anitabuehler on Oct 12th, 2008 at 10:12am
error on keypad
keep getting F2 my gas oven is 17 years old. could the keypad be faulty and can i order a new one
-
Posted by dplague on Oct 5th, 2008 at 5:47pm
no heat
works fine but does not heat unit is three years old
-
Posted by billsiebert on Sep 27th, 2008 at 3:30pm
Repair Microwave
Our Maytag microwave stopped working. Everything is dead. We have power, the fuse is ok, but I don't what to do or what to check next
-
Posted by spappadis on Sep 23rd, 2008 at 8:23pm
Above the range microwave
I can't find my manual and I am trying to find out how many cubic feet this model is.
-
Posted by dan_a_baca on Sep 8th, 2008 at 4:42pm
DOORSWITCH
DOOR SWITCH IS FAULTY. HAVE TO PULL DOOR OUT SLIGHTLY TO HAVE IT START. NEED PART NUMBER.
-
Posted by donpries on Sep 1st, 2008 at 12:02pm
Dimension Guide
Need a dimension template.
-
Posted by wahlstromconnie on Aug 9th, 2008 at 11:56am
Will not Work
The light inside the oven and the clock both work but the controls will not work at all. Looked at troubleshooting in manual and checked what they said, still no luck. Any Ideas?
Connie
-
Posted by billieglozer on Jul 19th, 2008 at 1:56pm
Manual
bought used microwave. need user manual.
-
Posted by forest on Jul 19th, 2008 at 8:38am
Door handle broke off
The door handle broke off and I cannot see how to reattach it without changing the door.
-
Posted by hpos1 on Jul 13th, 2008 at 10:01pm
no heat
everything works on my MMV4205BAS except the heat.
-
Posted by goo727aa on May 30th, 2008 at 7:35am
Microwave thruns off
After abut 2 min. of use the unit shuts down completely, even the clock goes blank. After a while it seems to turn back on by itself. There seems to be some sort of overheat breaker in the unit that trips, but I have no idea where to start looking. Can anyone give me some advice
-
Posted by shaddaih1 on May 6th, 2008 at 9:14am
Owner Manual
Just I need to see the instructions to hold it to the wall