Can You Help With These Problems?

• Sub-Zero Freezer 700BF
  Posted by kmlebon on Oct 1st, 2009 at 12:54pm
  
  
  700BF(SubZero) Freezer Lower Drawer Ice Maker
  I need a schematic showing how the metal rod trip/full-ice tray/shut-off sensor mechanism is positioned or installed. It's the artfully bent wire(Rube Goldberg) that controls the ice making process. Anybody got a clue?
• Sub-Zero Freezer BI-36U
  Posted by ncioletti on Jul 29th, 2009 at 10:31am
  
  
  Showroom Mode
  how do i take this fridge out of showroom mode?
• Sub-Zero Freezer 601F
  Posted by kerassiotis on Jul 11th, 2009 at 4:47am
  
  
  condenser fan
  not working
• Sub-Zero Freezer 601F
  Posted by kerassiotis on Jul 11th, 2009 at 4:47am
  
  
  condenser fan
  not working
• Sub-Zero Freezer Sub-Zero
  Posted by katmandu on Jun 17th, 2009 at 3:52pm
  
  
  warm fridge
  My refrigerator is not keeping things cold enough. The setting is now at 7 and my milk still went bad before the expiration date. I vacuumed the vent on the top a couple of weeks ago, it didn't help the problem. The seals look clean and unbroken. Any ideas?
• Sub-Zero Freezer 700TFI
  Posted by rudolphernst on Jun 2nd, 2009 at 11:33am
  
  
  Need to chage Compressor of Sub-Zero refrigerator
  I need to change the COMPRESSOR of my Sub-Zero Refrigerator Model Nr: 700TFI, Serial Nr: 1218602, year 1995.
  
  Can you help me, where i can find/buy the compressor for this refrigerator.
  
  Rgds'
  
  Rudolph
• Sub-Zero Freezer 501F
  Posted by pablo_ba_ro on May 6th, 2009 at 2:15pm
  
  
  necesito saber que compresor pongo capacidad
  freezer
• Sub-Zero Freezer 501F
  Posted by pablo_ba_ro on May 6th, 2009 at 2:12pm
  
  
  freezer
  necesito saber que capacidad de compresor se instala
• Sub-Zero Freezer 501F
  Posted by pablo_ba_ro on May 6th, 2009 at 2:12pm
  
  
  freezer
  necesito saber que capacidad de compresor se instala
• Sub-Zero Freezer Freezer 201FD
  Posted by terrysmart on May 5th, 2009 at 6:30pm
  
  
  Sub Zero Freezer Ice Maker
  Ice maker won't stop making ice cubes.Can't locate model # of ice maker.
• Sub-Zero Freezer
  Posted by john on Apr 25th, 2009 at 6:31pm
  
  
  ice maker
  just stopped making ice. could it be a plugged filter? Where is the filter
• Sub-Zero Freezer
  Posted by gbstout on Jan 26th, 2009 at 12:54pm
  
  
  freezer not freezing
  Freezer is cold, some foods frozen, ice cream soft, thermostat at maximum.
• Sub-Zero Freezer 249FFI
  Posted by apetro on Dec 26th, 2008 at 3:35pm
  
  
  automatic door closer
  plastic piece came off bottom. Now door won't automatically close. How to find spec sheet to define part?
• Sub-Zero Freezer
  Posted by jtanner1977 on Dec 13th, 2008 at 10:44pm
  
  
  icemaker stopped working
  icemaker worked for a couple of days but had black spots in the ice then quit altogether, need advice
• Sub-Zero Freezer 700BF
  Posted by eshafran on Oct 27th, 2008 at 12:39pm
  
  
  Control Board
  I need to know which control board is used so I can find the appropriate replacement part.
• Sub-Zero Freezer
  Posted by williebbad on Sep 21st, 2008 at 11:44am
  
  
  gasket
  replace gasket
• Sub-Zero Freezer 601F
  Posted by jcpaoli on Sep 20th, 2008 at 7:14pm
  
  
  service manuals
  Ice maker not working
• Sub-Zero Freezer
  Posted by steviebs06 on Sep 19th, 2008 at 4:55pm
  
  
  frost buildup
  The inside top of the freezer door,as well as the top of the freezer itself,have a buildup of frost that has to be scraped off daily. The seal was replaced, the door adjusted, and still there is frost.
• Sub-Zero Freezer
  Posted by dschimberg on Aug 7th, 2008 at 5:19pm
  
  
  ice drawer
  how do i fit the ice drawer in?
• Sub-Zero Freezer 601F
  Posted by stavic97 on Jul 24th, 2008 at 12:52pm
  
  
  -20 degrees
  Hello, My 601F temp display reads -20. when i restet it to 00 which is where i usually keep it, it goes right back to -20 once i shut the door. the lowest possible setting for it is -5, so how could it go to -20? Please help. Thanks!
• Sub-Zero Freezer 501F
  Posted by rmbernard on Jul 17th, 2008 at 1:53am
  
  
  Door Opens
  Freezer door does not draw closed tightly - easily opens without any resistance. I often find the door partially open and everything thawing
• Sub-Zero Freezer 501f
  Posted by jchow0001 on Jun 3rd, 2008 at 7:06pm
  
  
  Frost/Snow developing in freezer
  My freezer is not as cold as it used to be and the back panel inside the freezer has developed a lot of frost that is about 2 " thick. How to repair?
• Sub-Zero Freezer
  Posted by edward.michelson on Apr 27th, 2008 at 12:48pm
  
  
  Ice maker problem
  My ice maker is not making ice. I have had a problem with the freezer icing up. I replaced the timer, defrost coil and thermostat. Life was good. Until.... I started getting a big ice dam at the bottom collecting trough.
  
  
  
  Further investigation, the flexible heater cable that keeps the condesation …

Ask OwnerIQ Members for Help With A Problem

Let the ManualsOnline Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the ManualsOnline membership to view. You will be notified of responses by email. Required fields are in BOLD.