RSS What is this?
Help Requests

Zanussi Dishwasher




Can You Help With These Problems?

  • Posted by blue-eyes on Jun 30th, 2009 at 5:05pm

    top rack
    need help to stop the top rack from sticking when pulling it in and out
  • Posted by murray87 on Jun 28th, 2009 at 6:00pm

    new timer not working properly
    timer not lining up
  • Posted by goonerpav on Jun 13th, 2009 at 1:58pm

    zanussi dishwasher de6954
    water not heating
  • Posted by jdc1500 on Jun 9th, 2009 at 7:38am

    water does not heat up in my zanussie dishwaher
    water does not heat up
  • Posted by matt4mac on Jun 4th, 2009 at 1:53pm

    running cold
    got this second hand and is running cold, looking at parts is it the heater, heat sensor or pcb that typically needs replacing
  • Posted by ian1161 on May 29th, 2009 at 4:35pm

    dishwasher
    water not heating up in any mode, i'v fitted a new heater element..... any idea's
  • Posted by whauxwell on May 23rd, 2009 at 6:09am

    Zanussi dishwasher DWS909
    Where can I get a wiring diagram?

    Bill
  • Posted by s.w1ll1ams on May 10th, 2009 at 9:36am

    Zanussi DWS-939 dishwasher
    I don't no were to buy a dial for the front this as broke off so can't turn dishwasher on my dishwasher is silver please can some one help
  • Posted by l.a.hodges on May 4th, 2009 at 12:38pm

    NO HOT WATER DOES NOT DRY
    NO HOT WATER DOES NOT DRY, CAN U TELL ME WHY AND HOW 2 CURE.

    MANY THANKS
  • Posted by annabel.golden on May 1st, 2009 at 5:55pm

    on off switch
    replacement - 1521846012 part no. can this be wired into zd694
  • Posted by jon.sharp on Apr 19th, 2009 at 8:16am

    Upper Basket Adjustment
    Hi

    A small piece of the upper basket adjuster has snapped in half (circled in photo). I've superglued it but that won't hold it together during a wash. I can't see a part code anywhere on the entire adjustment fitting I have searched online for a couple of hours now but without a picture to match it…
  • Posted by piper6ph on Apr 16th, 2009 at 11:19am

    ZANUSSI DISHWASHER DWS 919
    IS NOT CALLING FOR WATER.HAVE CHECKED SUPPLY.EVERYTHING IS OK.HANDLE MICRO-SWITCH SEEMS OK.
  • Posted by hilaryann on Apr 15th, 2009 at 4:07am

    not drying
    Can you help - is there a simple explanation why my dishwasher's drying phase is not working or do I need to call an engineer out? Thanks.
  • Posted by fcbergin on Mar 28th, 2009 at 1:27pm

    dishwasher error 50
    my dishwasher is giving me error 50 on the display can you tell me what this means
  • Posted by leeann.mauchin on Mar 27th, 2009 at 3:53pm

    water not heating when cleaning
    when dishwasher is on the water is not heating up
  • Posted by sarah-jane851401 on Mar 25th, 2009 at 5:23am

    enquiry oon rinse aid
    Where do i put thw rinseaid in this machine?
  • Posted by chrismaria117 on Mar 16th, 2009 at 3:37am

    zanussi zsf 2400 dishwasher
    pump stays on all the time even with door open.also no response from programme dial when rotated
  • Posted by petewatt on Mar 3rd, 2009 at 5:30am

    zanussi zdf121 dishwasher
    Hi there

    my dishwasher is 18months old and has stopped heating the water. I realise it must be either the element, pcb or thermostat, but how can I isolate the fault to one of these please
  • Posted by edmaddocks on Mar 2nd, 2009 at 2:51pm

    is this problem easily fixed?
    dishwasher is not heating the water or drying
  • Posted by barryj_schofield on Feb 25th, 2009 at 4:15pm

    Water lying in bottom of unit
    I have a zdf601k model. It will not wash properly and I have dirty water lying in bottom of unit. Filters are clean drain hole seems clear?
  • Posted by barryj_schofield on Feb 25th, 2009 at 4:15pm

    Water lying in bottom of unit
    I have a zdf601k model. It will not wash properly and I have dirty water lying in bottom of unit. Filters are clean drain hole seems clear?
  • Posted by sylufc on Feb 19th, 2009 at 3:53pm

    dishwasher lights flashing
    zanussi built in dishwasher zdi 110x. i have the top 2 lights on the dishwasher flashng and now the dishwasher wont do anything except flash when a programme is selected none of the prgrammes will start any help would be much appreciated many thanks

    Simon Menary
  • Posted by dowen26 on Feb 14th, 2009 at 4:23am

    pcb
    remove
  • Posted by segang.ellis on Feb 1st, 2009 at 2:18pm

    Zanussi ZDF601K dishwasher
    When the dishwasher is started it almost immediately shows a flashing 30 sign on the display and although it is making a sound it's as though it pauses on that and won't wash
  • Posted by kyleolson1 on Jan 29th, 2009 at 10:32am

    HANDLE HAS COME OFF
    MY HANDLE HAS COME OFF .DO I NEED TO REMOVE ALL OF THE SCREWS AROUND THE DOOR TO ACCESS THE SCREW THAT HOLDS THE HANDLE IN PLACE?
  • Posted by sue_williams on Jan 22nd, 2009 at 12:58pm

    Dishwasher not working
    The model is new, have moved into house with it fiited in kitchen, no manual left. Have used it twice, now will switch on, but only stops on one programme. No other lights coming on top of door. er salt required etc.
  • Posted by jackjack.1 on Jan 19th, 2009 at 12:26pm

    hot water
    washes take ages and doesnt heat water
  • Posted by richie_dalton on Jan 17th, 2009 at 7:29am

    Locate Element?
    Hi all.



    No hot water and dishes not drying. I suspect the element, but I'm not sure.



    Where exactly is the element on this D/W?
  • Posted by charltons62 on Jan 15th, 2009 at 2:25am

    ?thermostat
    Hi, I have a Zanussi IZZI dishwasher and the water is no longer being heated by the machine, hence the cycle is taking ages and my dishes are not as clean as they should be. Any advice gratefully accepted!
  • Posted by fishers007 on Jan 14th, 2009 at 8:13am

    Filter
    Everything in my dishwasher seems to come out dirtier then it went in, I have replemished the salt and use top brand cleaners, I am going mad, as I have to wash most things again, by hand.

    Please HELP
  • Posted by marinkovic.rade on Jan 12th, 2009 at 4:53pm

    Drying
    The dishwasher work properly but does not

    dry dishes in the end.



    Thank You in advance
  • Posted by james on Jan 10th, 2009 at 5:01pm

    door springs
    Need to find source of new door springs, and instructions how to install same.
  • Posted by denisewall on Jan 6th, 2009 at 3:56pm

    manual
    need to get manual
  • Posted by jbillington on Jan 6th, 2009 at 6:12am

    Dishwasher Troubleshooting
    My dishwasher is not cleaning very well, and also the washing tab never seems to get released properly from the dispenser. Please email the instructions and trouble shooting guide.
  • Posted by jbillington on Jan 6th, 2009 at 6:12am

    Dishwasher Troubleshooting
    My dishwasher is not cleaning very well, and also the washing tab never seems to get released properly from the dispenser. Please email the instructions and trouble shooting guide.
  • Posted by mary.flynn on Jan 4th, 2009 at 5:10pm

    Leak
    Water leaks from underneath the dishwasher & its not the inlet pipe nor the outlet pipe - what could it be?
  • Posted by suecraig on Jan 4th, 2009 at 6:44am

    Manual
    Need to download this manual for second hand purchase
  • Posted by teresa.sexton on Jan 2nd, 2009 at 5:39am

    Dishwasher not working
    My 3 year old Zanussi DCE 5655 does not work. When switched on lights come on as normal but nothing else. This happened coincidence or not when I changed the plug to accomodate xmas lights. Now back in position nothing. Help
  • Posted by markccorabii on Dec 30th, 2008 at 10:20am

    drying light flashing
    dishwasher goes through cycle ok, but, when it gets to the drying cycle, it starts to flash
  • Posted by paul.killeen2 on Dec 30th, 2008 at 8:28am

    washing cold and not drying
    Have just ordered a new element but would appretiate any advice on installation or other possible solutions to fix it.Thanks
  • Posted by geoffmatkinson on Dec 29th, 2008 at 5:07pm

    I need a Manual for a LS14
    I need a Manual for my LS14 dishwasher
  • Posted by purplev101 on Dec 26th, 2008 at 2:46am

    Leak
    Hi The water is slowly continuing to load into the dishwasher after the finish of the cycle



    Thank you
  • Posted by johngill5 on Dec 25th, 2008 at 11:29am

    operating manual
    can you please send mea copy of the operating manual for the dishwasher zds 205 thanks john johngill5@hotmail.com
  • Posted by johngill5 on Dec 25th, 2008 at 11:28am

    operating manual
    can you please send mea copy of the operating manual for the dishwasher zds 205 thanks john johngill5@hotmail.com
  • Posted by nicolablair06 on Dec 23rd, 2008 at 6:39am

    red lights flashing
    dishwasher not completing cycle
  • Posted by glyn.price on Dec 19th, 2008 at 12:44pm

    installation
    fitting kick boards ?



    I dont understand the drawing. Can anyone help please?
  • Posted by anthonyconnaughton on Dec 18th, 2008 at 4:50pm

    what wrong
    not heating up properly & not cleaning the pots properly
  • Posted by marktait on Dec 15th, 2008 at 1:46pm

    no hot water
    not heating the water
  • Posted by lumicap on Dec 13th, 2008 at 8:53am

    error
    alm 3
  • Posted by lumicap on Dec 13th, 2008 at 8:44am

    windows xp
    alm 3
  • Posted by liz.turner64 on Dec 12th, 2008 at 6:28am

    water not heating and not drying
    water dose not heat up and dose not dry contents
  • Posted by liz.turner64 on Dec 12th, 2008 at 6:28am

    water not heating and not drying
    water dose not heat up and dose not dry contents
  • Posted by liz.turner64 on Dec 12th, 2008 at 6:28am

    water not heating and not drying
    water dose not heat up and dose not dry contents
  • Posted by liz.turner64 on Dec 12th, 2008 at 6:28am

    water not heating and not drying
    water dose not heat up and dose not dry contents
  • Posted by grech.jane on Dec 12th, 2008 at 1:44am

    dishwasher
    dishwasher does not drain. Everything has been checked
  • Posted by tessbby on Dec 10th, 2008 at 12:57pm

    rinse aid
    were do u put the rinse aid ?
  • Posted by angiedyl on Dec 6th, 2008 at 6:59pm

    ,30
    ,30 appears and I only have the dishwasher a week, I've only used it 4 times the most. I'm not impressed !!!
  • Posted by albemarleplace on Dec 5th, 2008 at 5:39am

    MANUAL
    DISHWASHER NO MANUAL
  • Posted by sales on Dec 3rd, 2008 at 8:29am

    NOT WASHING
    PLEASE COULD YOU HELP MY ZT695 SOMETIMES NOW MORE THAN OFTEN WASHES BUT DOES NOT RELEASE THE TABLET THE DOOR TO THE TABLET IS OPEN BUT NOT BEEN USED AND ITS DONE A FULL WASH HOT WATER BUT ALL STILL DIRTY I HAVE TRIED DIFFERENT TABLETS BUT NO DIFFERENCE FAIRY AND FINSH TABLETS I HAVE USED
  • Posted by julian on Nov 30th, 2008 at 3:02pm

    faulty dishwasher
    when switched on dishwasher makes a noise as if trying to pump water but nothing happens then 2 lights flash on the control panel
  • Posted by nornopac on Nov 30th, 2008 at 5:42am

    manual in english
    have manual in bulgarian only
  • Posted by sylvia.jones on Nov 26th, 2008 at 2:17pm

    programmes not working
    dishwaher has power but none of the programmes will work when i press the buttons
  • Posted by sandiminman on Nov 12th, 2008 at 10:02am

    Wiring diagram
    Need wiring diagram for timer connections
  • Posted by sashamcardle on Nov 11th, 2008 at 5:36pm

    dishwasher
    program skipping going to end of cycle stright after i tur it on
  • Posted by jennieleighhough on Nov 7th, 2008 at 7:11am

    faults
    when selecting a program to wash it starts to fill but then shortly after the end button flashes and also at the bottom of the dishwasher when i remove the plate at the bottom some water still remains
  • Posted by steve.glynis on Nov 4th, 2008 at 6:44am

    Dishwasher not heating
    Cycle runs but does not heat. Could this be the pcb board and if so how do you access and check/fix it?



    Any advice appreciated
  • Posted by gynname on Nov 2nd, 2008 at 3:39pm

    Instruction manual
    I cannot find the model on the website to download a manual
  • Posted by brendangraham on Oct 29th, 2008 at 7:55am

    Water not heating & machine not drying
    This would appear to be a known problem. Machine is 4 years old and trouble free to-date. Requesting access to technical manual to identify errant part and contact details for part supplier in either Mayo or Dublin, Ireland. Thank you, Brendan Graham
  • Posted by cathdooley on Oct 26th, 2008 at 2:33pm

    not rinsing properly
    dishes coming out still dirty on top shelf
  • Posted by jasper_1931 on Oct 23rd, 2008 at 2:11pm

    A5 alarm
    Alarm 5 shows inlet hose squashed or bent which it isnt no cold water is entering the dishwasher
  • Posted by nchristie1978 on Oct 19th, 2008 at 5:10am

    not washing
    when you turn it on it sounds like it is working but no water is coming into the machine
  • Posted by jayne.wright on Oct 17th, 2008 at 6:38am

    How do I repair
    Spring has come off of dishwasher door.
  • Posted by saeeed3 on Oct 16th, 2008 at 9:44am

    DCS 382
    i wanna the manual
  • Posted by mikemattennis on Oct 13th, 2008 at 2:40pm

    Dishwasher problem
    The dishwasher is a few years old and of recent times ahs given some inyermittent issues, I have checked the filter which appears clear but there was one of two L-shaped white Nylon( I think) pipes that was just lying under the filter and the issue is that the washer will not drain
  • Posted by biju.koshy on Oct 13th, 2008 at 2:13pm

    Dish washer spare parts list and manual
    Not working, no display need processor board
  • Posted by pamelssimkiss on Oct 12th, 2008 at 7:42am

    need a manuel
    was given dishwasher but no manuel with it would like to get one
  • Posted by cdomegan on Oct 9th, 2008 at 9:05am

    handle
    One side of the dishwasher handle has come away, wondering if there is any way to fix this
  • Posted by damlls1 on Oct 5th, 2008 at 1:25pm

    about item
    hi can you tell me if it is a cold feed as i have it conneted to the cold but it does not get hot or can you tell me what has gone and how much the part is thanks
  • Posted by nkurdy on Oct 5th, 2008 at 5:35am

    need advice
    there is air in the system and the dishwasher is not filling up with water
  • Posted by harouche on Oct 4th, 2008 at 4:47am

    Soap Dispenser
    The soap dispenser has worn and cannot click shut and therefore the soap tab wont stay in place. I can get a replacement part, but, are they eay to fit? The part cost is about £30. I am not a professional just a house diy guy. If you have experience, please advise. Thank you.
  • Posted by gopalanrajan on Oct 2nd, 2008 at 12:03pm

    How to use DE6444 Dishwasher
    Hello there,



    Could you highlight how to use the above dishwasher model, or guide us to any nearerst model, we are unable to use this dishwaser
  • Posted by brianmdinan on Sep 26th, 2008 at 9:09am

    results after washing
    a white film covers everything after a wash.

    what is the likely cause?
  • Posted by cypressoaks7 on Sep 22nd, 2008 at 4:00am

    Dishwasher stopping
    Dishwasher is stopping and displaying a flashing number 20. Is this a fault number and what can i do to clear it.
  • Posted by janetdallas on Sep 18th, 2008 at 12:26pm

    studio compact
    5 setting
  • Posted by asmith on Sep 15th, 2008 at 6:31pm

    Fitting The Door Seal Gasket
    How do you fit the rubber door seal gasket to the base of the door
  • Posted by michellecrawley75 on Sep 15th, 2008 at 10:50am

    trouble shooting
    its not emptying water in the bottom of it
  • Posted by latouchee on Sep 10th, 2008 at 4:56am

    Water not entering machine
    The dishwasher is not filling with water there is not enough water flowing to move the arms, checked the hose and supply both ok.

    Is it a faulty inlet valve and if so were is it situated.
  • Posted by paulphillips on Sep 7th, 2008 at 11:11am

    not completing cycle
    which ever program i select the programmer will start going around then stop after a few minutes. the machine does not take any water in.
  • Posted by ajfox_uk on Sep 4th, 2008 at 11:03am

    lights not working
    main light on , but other lights isnt working,Why?

    Manchine now non operable
  • Posted by lindawileman on Aug 16th, 2008 at 5:21am

    on/off button
    The on/off button won't stay on. If I holdthe button in the machine seems to work ok.
  • Posted by iancrosbie on Aug 15th, 2008 at 1:03pm

    dishwasher manual
    dishwasher manual wanted
  • Posted by garyshippey on Aug 4th, 2008 at 5:05am

    cycle not starting
    When starting a cycle the green light flashes as well as the red end button and the cycle does not begin.
  • Posted by valandpeter6 on Jul 30th, 2008 at 4:35am

    Fault finding
    Hi,

    Are there any checks I can carry out to ensure correct and full operation of the machine? I've carried out the basics - clean filter, etc. but am not sure if it runs the whole programme correctly.

    Thanks
  • Posted by andrew_mackay_sco on Jul 29th, 2008 at 4:51pm

    will not go beyond initialising controller
    can change the modes but the flashing led for starting up does not go to on solid, suspect a sensor is faulty or pcb connection
  • Posted by swalesie on Jul 29th, 2008 at 1:16pm

    Require Manual
    Require Manual
  • Posted by david.smith9376 on Jul 27th, 2008 at 1:22pm

    won`t empty
    stops cycle early and doesn`t empty all the water out
  • Posted by emmanueley on Jul 25th, 2008 at 9:51am

    PROBLEM
    I CANT ADD SOAP
  • Posted by coombs.trevor on Jul 19th, 2008 at 1:43pm

    salt
    where do i turn salt up on dishwasher as salt light has not come on and things not washing properly
  • Posted by johnparry.jones on Jul 13th, 2008 at 1:46pm

    Dishwasher Zanussi Electrolux DWS939
    Disconnecting Dishwasher,want to empty water out
  • Posted by pkells on Jul 12th, 2008 at 7:44am

    Problem
    Machine stops and beeps,half way through any program.Shows AL3,and water not heating.The stat and element are ok!!!

Ask OwnerIQ Members for Help With A Problem

Let the ManualsOnline Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the ManualsOnline membership to view. You will be notified of responses by email. Required fields are in BOLD.


(optional)
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  

Trying to Install This Appliance?
Dimension Express provides specifications and dimensions for the professional and do-it-yourself homeowner. Download the specification sheet.

Recent Articles


Register now to download manuals, solve product problems, read blogs and newsletters, and get a free personal homepage

Recent User Activity



About OwnerIQ | Advertise | Manufacturers | Terms and Conditions | Privacy Policy