• error code 01
  
  
  you should probably call a technician, if you want to pull it out yourself and remove the plastic bottom cover and dry it out it will solve the problem but i dont know how to reset the error code.
  
  
  Was this comment useful?


• error code 01
  
  
  Usually the error code 01 means you backed up water in the unit. First be sure that the drain is clear. Run the garbage disposal and be sure your sinks are draining.
  
  I got lucky on a EIDW6105 unit by trying this.
  
  All the lights are flashing and it shows error code 01.
  
  Push down on two of the buttons and hold (I pushed on the Favorite and Heavy buttons), until the flashing stops (about 8 seconds).
  
  The machine now showed an error code 08. Then hit the start button. My washer then cleared and runs normally.
  
  Hope this helps, better than a sevice call to clear the code.
  
  
  Was this comment useful?


• Error E1
  
  
  The issue with this error E1 has to do with the drain connection to the disposer. The solution would be to connect the diswasher drain directly to thr frain pipe instead of drainin the dishwasher through the disposer. Once you clear the drain, backed up water, and re-connect the drain, the error should disapear, Make sure you turn the electical circuit off when performing any repairs. Safety is crucial.
  
  
  Was this comment useful?


• Error E1
  
  
  I held the two buttons down for 8 secs and the dishwasher displays SS or 55 not sure what it is trying to tell me. Anyone with suggestions.
  
  
  Was this comment useful?

Add Comment