search our site:
RSS What is this?
Help Request

Bosch Appliances Dishwasher SGV46M43GB

indicator
Posted by deborah.syme on Aug 21st, 2008 at 8:32pm

can the audible end of programme indicator be turned off? we hate intrusive beeping!!!

Add a Comment Comment (1)

2 members are looking for a solution to this problem.



Comment On This Problem

  • RE: indicator
    Posted by vinpao on Sep 1st, 2008 at 11:32pm

    Try one of these two methods, depending on the model(mine is an SHV model and I removed the beep with the second procedure).

    METHOD 1
    * Open door, push and hold Delicate/Econo button, then turn the dishwasher on while holding Delicate/Econo button.
    * Release Delicate/Econo button.
    * If module beeps, then end of cycle tone is on. Press Delicate/Econo button to disable tone.
    * If module doesn't beep after button is pressed, then tone is disabled.
    * Turn off dishwasher to save selection.


    METHOD 2
    If you wish to eliminate or reduce the volume of the end of cycle beep you can do so by powering off the unit and turning back on while holding the right button “Cancel/Reset” (i.e. the right button of the Cancel/Reset combination). The beep has 3 volumes levels and silent, press the right “Cancel/Reset” button to cycle through the settings. Power the unit back off to save your setting.

    Was this comment useful?

Add Comment


(optional)
If you have a helpful URL, add it here.
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 

Recent Blog Posts



Recent User Activity



OwnerIQ Network | Manufacturers | About | Research | Press