Filter
Top Products
9. Rigging & Suspension
General Safety Advice
The Tannoy Professional hardware covered in this guide has been designed to offer
quick, simple, cost effective and secure solutions for mounting specific Tannoy
Professional loudspeakers. This hardware has been designed and manufactured with
a high safety load factor for its specific role. To ensure the safest possible use of the
hardware covered in this guide, it must be assembled in strict accordance with the
instructions specified. The information relating to the assembly and the safe use of
these accessories must be understood and followed. The installation of Tannoy
Professional loudspeakers using the dedicated hardware should only ever be carried
out by fully qualified installers, in accordance with all the required safety codes and
standards that are applied at the place of installation.
WARNING: As the legal requirements for flying change from country to country,
please consult you local safety standards office before installing any product. We also
recommend that you thoroughly check any laws and bylaws prior to commencing
work.
Tannoy Professional hardware has been designed for use with specific Tannoy
Professional loudspeakers, and is not designed or intended for use with any other
Tannoy Professional products, or any other devices. Using Tannoy Professional
hardware for any purpose other than that indicated in this guide is considered to be
improper use. Such use can be very dangerous as overloading, modifying,
assembling in anyway other than that clearly stated in the manual, or damaging
Tannoy Professional hardware will compromise safety.
The component parts of any Tannoy Professional hardware device must only be
assembled using the accessory kits supplied and in strict compliance with the user
manual. The use of other accessories or non-approved methods of assembly may
result in an unsafe hardware system by reducing the load safety factor. Welding, or
any other method of permanently fixing hardware components together or to the
integral fixing points in the cabinet should never be used.
Whenever a Tannoy Professional loudspeaker is fixed to a surface using a Tannoy
Professional hardware device, the installer must ensure that the surface is capable of
safely and securely supporting the load. The hardware employed must be safely,
securely, and in accordance with the manual, attached both to the loudspeaker and
also to the surface in question, using only the fixing holes provided as standard and
covered in the manual. Secure fixings to the building structure are vital. Seek help
from architects, structural engineers or other specialists if in any doubt.
All loudspeakers flown in theatres, nightclubs, conference centre or other places of
work and entertainment must, be provided with an independent, correctly rated and
securely attached secondary safety – in addition to the principle hardware device.
This secondary safety must prevent the loudspeaker from dropping more than
150mm (6”) should the principle hardware device fail.
!
!
9