AEG 44060 VIL Dishwasher User Manual


 
Operating instructions
16
If you are using dishwasher detergent that already contains rinse aid,
the detergent including the rinse aid must be placed in the detergent
compartment. In this case the rinse aid inflow must be deactivated in
order to avoid a double dosage.
Deactivation/activation of the inflow of rinse aid
(The dishwasher must be switched off)
When the inflow of rinse aid has been deactivated, also the rinse
aid indicator light on the control panel is automatically
deactivated.
1. Press the On/Off push button. All programme selection push
buttons indicator lights will illuminate (setting mode).
If only one programme selection push button indicator light is
illuminated, this means that a washing programme has been
selected.
The programme must be cancelled: press simultaneously the
function push buttons 2 and 3 for about 2 seconds, the indicator
light of the setted programme push button starts flashing for
about 2 seconds.
After about 2 seconds the indicator lights of all the programme
selection push buttons will illuminate indicating that the setted
programme has been cancelled and that the machine is now in
setting mode.
2. Press simultaneously function push buttons 2 and 3, the indicator
lights of the function push buttons 1, 2 and 3 start flashing.
3. Press the function push button 2, the indicator lights of function
push buttons 1 and 3 turn off while the indicator light of the
push button 2 goes on flashing, at the same time the "end of
programme" indicator light illuminates, indicating that the inflow
of rinse aid is active.
4. To deactivate the inflow of rinse aid, press again the function
push button 2, the "end of programme" indicator light turns off,
indicating that the inflow of rinse aid has been deactivated.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off push button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
To activate again the inflow of rinse aid simply follow the above
operations until the "end of programme" indicator lights illuminates.
152965 29/0en 11-02-2004 10:13 Pagina 16