Filter
Top Products
12
To fill:
1. To fill with salt, unscrew the cap of the
salt container.
2. Pour 1 litre of water inside the
container (this is necessary only
before filling with salt for the first
time).
3. Using the funnel provided, pour in the
salt until the container is full.
Do not worry if water overflows from
the unit when filling with salt, this is
quite normal.
4. Replace the cap making sure that
there is no trace of salt on the screw
thread or on the gasket.
5. Screw on the cap tightly.
S
A
L
E
S
A
L
T
S
A
LZ
S
E
L
SR14
Filling with special salt
Caution! The packaging of dishwasher salt and detergents are often very similar. The
accidental filling of the salt compartment with detergent would ruin the water
softener. Each time you add salt, make sure the carton you have in your hand really
is salt.
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a dishwasher,
especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete washing
programmes. This will prevent any grains of salt or salty water, which
may have been spilled, remaining on the bottom of the machine for
any period of time, which may cause corrosion.
The INTENSIV 70° indicator light remains off for about 5 seconds after which it
starts flashing indicating the new level selected.
5. To memorise the new level, switch off the dishwasher by pressing the On/Off
push button.
152976 12/1en 27-05-2002 11:45 Pagina 12