AEG 88060 Dishwasher User Manual


 
2. Press the delay touchpad again and
again until the display shows the de-
lay time you want to set (from 1 to
24 hours).
The delay time flashes in the dis-
play.
The delay indicator is on.
3. Close the appliance door. The
countdown starts.
If you open the door, the display
shows the countdown of the de-
lay start that decreases with steps
of 1 hour.
When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the
appliance continues from the point of
interruption.
Cancelling the delay start while
the countdown operates
1. Open the appliance door.
2. Press the delay touchpad again and
again until the display shows the
programme number.
3. Close the appliance door. The pro-
gramme starts.
Cancelling the programme
Press RESET until:
The display shows two horizontal sta-
tus bars.
Make sure that there is deter-
gent in the detergent dispenser
before you start a new pro-
gramme.
At the end of the programme
When the programme is completed, an
intermittent acoustic signal operates.
1. Open the appliance door.
The end indicator is on.
The display shows 0.
2. Press the on/off button to deacti-
vate the appliance.
3. Close the water tap.
If you do not press the on/off
button, the AUTO OFF device
automatically deactivates the
appliance after some minutes.
This helps to decrease the ener-
gy consumption.
For better drying results, keep the
appliance door ajar for some mi-
nutes.
Let the dishes become cold before
you remove them from the appli-
ance. Hot dishes can be easily dam-
aged.
First remove the items from the lower
basket, then from the upper basket.
There can be water on the sides
and on the door of the appli-
ance. Stainless steel becomes
cool more quickly than the
dishes.
ENGLISH 17