American Standard 7236E Hot Tub User Manual


 
VIRTUOSO ELITE
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
VIRTUOSO ELITEWHIRLPOOL
Comfortable two person design with dual back
support positions and factory installed grab bar
7236E (specify White 020, Bone 021, or
Linen 222)
Acrylic with fiberglass reinforcement
2.0 HP self-draining pump/motor
with dry run seal
Ten multi-directional and flow adjustable jets
including:
Two high performance Ideal-flowJets
Eight interchangeable Flex-jets
Three silent air volume controls
Deck-mounted On/Off control
Complete factory installed and tested
whirlpool system
7236EC (specify White 020, Bone 021, or
Linen 222)
Same as above with the StayClean
whirlpool system featuring Antimicrobial
AlphaSan®
Nominal Dimensions:
72 x 36 x 21-1/4"
(1829 x 914 x 540mm)
© 2003 American Standard Inc.
HD-007
SPS 7236E
Revised 6/03
Compliance Certifications -
Meets or Exceeds the Following Specifications:
Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
ASME A112.19.7M for Whirlpool Appliances
ANSI Z124.1 for Plastic Bathtubs
ASTM E162 for Flammability
NFPA 258 for Smoke Density
Components Needed:
Bath Filler*: (specify finish)
Bath Drain: BATH-DRAIN
(specify Chrome 002, Polished Brass 099,
or Satin 295)
Custom Accessories Available:
Pulse Jet Kit: PULSE-JET (two per kit,
specify White 020, Bone 021, or Linen 222)
Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
Six Foot Apron: 6FT-APRON (specify White
020, Bone 021, or Linen 222)
E-Z-InstallWhirlpool Heater - EZHEAT-100
Tile Bead Kit: TILE-BEAD
* See American Standard Faucet Selector
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
NOTE: E-Z-InstallWhirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.