Filter
Top Products
PRODUCT: QUANTITY: ITEM #:
Model: XWAV1417A
Designed Smart
Built Solid
APW Wyott Design Features
Options
X*WAV
®
1417A
Pass-Through Conveyor Oven
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com· info@apwwyott.com
Rev. 2/1/2006
X*WAV™ 1417A Pass Through Conveyor Oven
Heat Systems…the X*Treme Difference!
• The X*WAV-EZ
®
ceramic heat system has over 31% more efficiency
in its InfraRed Energy vs. Quartz based units.
• X*WAV-EZ
®
heat system is a concentrated, focused source of
radiant energy that consistently sends InfraRed evenly toward the
conveyor belt...at both high and low temperature levels…InfraRed
efficiency is 96%!
Operations that are X*Tremely Easy & Efficient!
• Conveyor speed can be set between speeds that are slow (12
minutes) to a maximum speed of 30 seconds.
• Crumb trays are provided on either end of the toaster. An extended
conveyor shelf is supplied for “exit” area....allowing easy off-loading of
products.
• Fully insulated top and sides provide “Cool to the Touch” exteriors...
Thermostatically controlled fan keeps exterior surface cool, even
when unit is turned off.
• X*WAV
®
control panel is recessed vs. the “exposed” control panel
on the competition…reducing inadvertent bumps on control knobs that
change the performance speed or temperature.
Built to Last
• X*WAV
®
Ceramic heaters are made of a stronger material that
maintains a moderate material temperature. They last significantly
longer than Quartz Elements and do not have the issue of shattered
glass in your operation.
• Bottom heat is provided by a calrod element that can easily handle
drippings and grease…competitive units use quartz elements that
can shatter with grease drippings.
Reliability backed by APW Wyott’s Warranty
• Certified by the following agencies:
• Top heat - 2500 Watt ceramic infrared heat system
• Bottom heat - 2500 Watt calrod element
• Infinite heat control for top and bottom heat systems
• Conveyor speed control knob
• Thermostatically controlled cooling fan system
• Product entry & exit chamber doors, adjustable to 3 7/8” high
• Removable exit shelf that extends from end of conveyor
• Removable crumb trays
• Stacking Kit (94000189) • End Stop (PS0043)
See reverse side for product specifications.