Asus M2N-PLUS SLI Ventilation Hood User Manual


 
4-24 Chapter 4: BIOS setup
4.4.3 PCIPnP
Select Menu
Item Specic Help
Select Yes if you are using
a Plug and Play capable
operating system. Select
No if you need the BIOS to
congure non-boot devices.
PCIPnP
Plug & Play O/S [No]
Primary Display Adapter [PCI]
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
Plug & Play O/S [No]
When set to [No], the BIOS congures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
congures the Plug and Play devices not required for boot.
Conguration options: [No] [Yes]
Primary Display Adapter [PCI]
Allows selection of graphics controller to use as the primary boot device.
Conguration options: [PCI] [PCI-E]
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specic Help
Press [Enter] to set.
Onboard Device Conguration
IDE Function Setup
NVRAID Conguration
USB Conguration
Onboard nVidia LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard USB Audio [Enabled]
ASUS ASAP [Disabled]
Onboard 1394 [Enabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378/IRQ7]
Parallel Port Mode [EPP]
x ECP Mode Use DMA 3
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
4.4.4 Onboard Device Conguration
AMD Cool ‘n’ Quiet Function [Disabled]
Enables or disables the AMD Cool ‘n’ Quiet technology.
Conguration options: [Auto] [Disabled]