Open as PDF
Installation & Assembly
Microwave Oven Bracket Installation Instruction
For use with the following Avanti models:
Microwaves – MO7082MB, MO7191TW, MO7192TB, MO7103SST& MO8003BT
Refrigerators – Can be used with all Compact, Midsize & Counterhigh models except the
RM4550W-2, RM4551B-2, RM4589SS-2 and BCA4561B-2
Parts List &
Before you start this installation make sure you have all the parts listed below.
Read entire installation sheet before you start assembly of this item.
B 9705-001 1 Allen Wrench
No. 8 x 1” Phillips Pan Head
Sheet Metal Screw
Plastic Anchor (¼” x 1”)
E 9705-004 4 No. 8 x 5/8 Phillips Hex Head
Self Tapping Screw & Washer
1) Bracket Configuration:
Holes (A) and (B) are the existing holes in the upper part of the Metal bracket to be attached to the
microwave oven. Holes (C), (D), (E) and (F) are also existing holes in the lower part of the Metal bracket to
be installed on to the refrigerator. See illustration #1.