Beko FN126420 X Refrigerator User Manual


 
EN
11
1. Quick Freeze Function:
Quick Freeze indicator turns on when
the Quick Freeze function is on. Press
QuickFreeze button again to cancel
this function. QuickFreeze indicator
will turn off and normal settings will
be resumed. QuickFreeze function will
be cancelled automatically 34 hours
later if you do not cancel it manually.
If you want to freeze plenty amount of
fresh food, press QuickFreeze button
before you place the food into the
freezer compartment. If you press
the QuickFreeze button repeatedly
with short intervals, the electronic
circuit protection will be activated
and the compressor will not start up
immediately.
2. Quick Freeze Indicator
This icon flashes in an animated style
when the QuickFreeze function is
active.
3. Freezer Set Function:
This function allows you to make the
freezer compartment temperature
setting. Press this button to set
the temperature of the freezer
compartment to -15 / -18 / -21 and
-24 respectively.
4. Temperature Setting Indicator
Setting indicator on the right hand side
of the temperature value set by Freezer
Set Function turns on and the other
temperature setting indicators remain
off.
5. Temperature Indicators:
-15, -18, -21 and -24 indicators light
up continuously.
6. Eco-Fuzzy (Special Economic
Usage) Function:
Press Eco-Fuzzy button to activate the
Eco Fuzzy Function. Refrigerator will
start operating in the most economic
mode at least 6 hours later and the
economic usage indicator will turn
on when the function is active. Press
Eco Fuzzy button again to activate the
Eco-Fuzzy function.
7. Eco-Fuzzy (Special Economic
Usage) Indicator:
This icon lights up when the Eco-Fuzzy
Function is active.
8. High Temperature/Error Warning
Indicator:
This light comes on during high
temperature failures and error
warnings.
9. Economic Usage Indicator:
Economic Usage Indicator turns on
when the Freezer Compartment is set
to -15°C.
10. Freezer Off Function:
Press Freezer Set button for 3
seconds to activate the Freezer Off
Function. Refrigerator stops cooling.
All indicators except the Freezer Off
on the display turn off. Buttons on the
display do not function. Press Freezer
Set button for 3 seconds to cancel this
function.