Beyond Microwace Oven Microwave Oven User Manual


 
Beyond Microwaving
37
To use the scanning wand:
1. Locate the barcode on the package of food that you wish
to prepare. On the oven control panel, press SCAN. A red
light will come on in the end of the scanning wand.
Whenever you press SCAN, the Scan icon on the display
will blink. You can press Stop/Cancel to stop the scan
-
ning.
2. Hold the scanning wand as you would hold a pencil.
Place the lighted end of the wand flat against the package and
to the left of the barcode.
3. Using a steady sweeping motion, move the wand across
the bar code from left to right and from right to left at a
medium to fast speed. Be sure to scan the entire barcode and
to keep the wand tip touching the package. A beep tells you
that the barcode was scanned successfully.
FIGURE 4. Scanning With the Wand