Black & Decker 4-14-88S Blender User Manual


  Open as PDF
of 2
 
Size: 19.685" x 17.5"
NEED HELP?
For service, repair or any questions
regarding your appliance, call the
appropriate 800 number on cover of this
book. Please DO NOT return the product to
the place of purchase. Also, please DO NOT
mail product back to manufacturer, nor bring
it to a service center. You may also want to
consult the website listed on the cover of this
manual.
Two-Year Limited Warranty
(Applies only in the United States
and Canada)
What does it cover?
• Any defect in material or workmanship
provided; however, Applica’s liability will
not exceed the purchase price of product.
For how long?
• Two years after date of purchase.
What will we do to help you?
• Provide you with a reasonably similar
replacement product that is either new or
factory refurbished.
How do you get service?
• Save your receipt as proof of date of sale.
• Visit the online service website at www.
prodprotect.com/applica, or call toll-free
1-800-231-9786, for general warranty
service.
• If you need parts or accessories, please
call 1-800-738-0245.
What does your warranty not cover?
• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modied in any
way
• Products used or serviced outside the
country of purchase
• Glass parts and other accessory items
that are packed with the unit
• Shipping and handling costs associated
with the replacement of the unit
• Consequential or incidental damages
(Please note, however, that some states
do not allow the exclusion or limitation of
consequential or incidental damages, so
this limitation may not apply to you.)
is a registered trademark of The Black & Decker Corporation,
Towson, Maryland, USA
es una marca registrada de The Black & Decker Corporation,
Towson, Maryland, E.U.
R12009/4-14-88E/S
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
❍Read all instructions.
❍To protect against risk of electrical shock do not immerse cord,
plugs or appliance in water or other liquid.
❍Close supervision is necessary when any appliance is used by or
near children.
❍Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning.
❍Avoid contacting moving parts.
❍Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner. Return appliance to the nearest authorized service
facility or call the appropriate toll-free number on the front of
this manual for examination, repair or electrical or mechanical
adjustment. Or, call the appropriate toll-free number on the
cover of this manual.
❍The use of attachments, including canning jars, not
recommended by the manufacturer may cause fire, electric
shock or injury.
❍Do not use outdoors.
❍Do not let cord hang over edge of table or counter.
❍Keep hands and utensils out of container while blending to
reduce the risk of severe injury to persons or damage to the
blender. A scraper may be used, but must be used only when the
blender is not running.
❍Blades are sharp. Handle carefully.
❍To reduce the risk of injury, never place cutter-assembly blades
on base without jar properly attached.
❍Always operate blender with cover in place.
❍When blending hot liquids, remove center piece of two-piece
cover.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to
modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to
prevent removal of the outer cover. To reduce the risk of fire or electric
shock, do not attempt to remove the outer cover. There are no user-
serviceable parts inside. Repair should be done only by authorized service
personnel.
ELECTRICAL CORD
a) A short power-supply cord (or detachable power-supply cord) is to be
provided to reduce the risk resulting from becoming entangled in or
tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are available
and may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the detachable power-supply
cord or extension cord should be at least as great as the
electrical rating of the appliance,
2) If the appliance is of the grounded type, the extension cord
should be a grounding-type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape
over the countertop or tabletop where it can be pulled on by
children or tripped over.
Note: If the power supply cord is damaged, it should be replaced by
qualified personnel; in Latin America, by an authorized service center.
† 1. Lid cap (Part # 081049)
† 2 Lid (Part # 081050DZ102 (W), 081050EE (B), BL10450HR-02 (R))
† 3. Blending glass jar [48 oz. / 1.4 L] (Part # 99002)
4. Handle
† 5. Gasket (Part # 09150)
† 6. Blade assembly (Part # 77766)
† 7. Jar base
(Part # 03474DZ101 (W), 03474EB (B), BL10450HR-06 (R))
8. Blender base
9. Control panel (see A2 for details)
10. Hi/Low Button
11. ICE CRUSH button
12. Pulse/Off button
13. Speed buttons
Note: † indicates consumer replaceable/removable parts
Product may vary slightly from what is illustrated.
How to Use
This unit is for household use only.
GETTING STARTED
• Remove all packing material and any stickers from the product.
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING section of this
manual.
• Wipe outside of appliance with a damp cloth; dry thoroughly.
BLENDER JAR ASSEMBLY
1. Turn blending jar upside down and place flat on countertop or work surface.
2. Put gasket on top of blade assembly.
3. Place blade assembly with gasket into bottom opening of the jar with blades
facing down.
4. Place jar base onto jar and rotate clockwise until it is tight.
5. Turn assembled jar right side up.
6. Place lid with lid cap onto blending jar.
7. Uncoil power cord from storage area under the base.
8. Place jar assembly in unlocked position on base and turn jar clockwise until
jar is in the locked position.
9. Blender is now ready for use.
USING YOUR BLENDER
1. Make sure appliance is OFF.
2. Place foods to be blended into jar.
3. Place lid on jar; make sure lid cap is in place.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods, such
as ice, cheese, nuts and coffee beans, keep one hand on the lid to keep blender in
place.
5. Select the speed that best suits your desired task. Press Hi/Low with the task
button to switch speeds. (See SPEED CHART)
6. When blending thick mixtures, such as smoothies, power drinks and
milkshakes press the Pulse button several times to begin the blending
process. Press the Pulse button for no more than 5 seconds at a time. This
helps break up the ice.
7. Open the lid cap to add ingredients while the blender is running and drop
ingredients through the opening.
Important: Do not remove the lid while the blender is running.
8. When finished, press the Pulse/Off button. Make sure blades have completely
stopped before attempting to remove the blending jar from the base.
9. To remove the jar, grasp the handle, turn slightly counterclockwise to unlock,
before lifting up.
10. Remove lid to pour.
11. Always unplug the appliance when not in use.
ICE CRUSH BUTTON
1. To crush ice, pour liquid in blending jar first, then add 1 cup (about 6 ice
cubes).
2. Hold one hand firmly on lid and pulse, using the Ice Crush button (press Ice
Crush button at 5-second intervals).
Tip: Use the lid cap to measure ingredients up to 60 ml / 2 oz. when adding
ingredients like lemon juice, cream, or liqueurs.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service
personnel.
CLEANING
1. Before cleaning, turn off and unplug appliance.
2. Lift blending jar by handle off power base.
3. Remove jar base by turning counterclockwise until loose.
4. Remove gasket and blade assembly.
Caution: Blades are sharp, handle carefully.
5. Remove lid and lid cap.
6. Wash removable parts by hand or in your dishwasher. Place jar on bottom rack
and rest of parts on top-rack only.
FAST CLEAN
For quick cleanup, combine 1 cup hot water and a drop of liquid dish soap in the
blending jar. Cover and blend on Fast Clean for about 30 seconds. Discard liquid
and rinse jar thoroughly.
Important:
• Do not place jar parts in boiling liquids.
• Do not immerse base in liquid. Wipe base with damp cloth and dry thoroughly.
• Remove stubborn spots by rubbing with damp cloth and nonabrasive cleaner.
Note: If liquids spill onto base, wipe with damp cloth and dry thoroughly. Do not
use rough scouring pads or cleansers on parts or finish.
STORAGE
For convenient storage, wrap the cord around the feet on the bottom of the
blender base.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Jar bottom does not
come off of jar.
A vacuum has been
formed.
Place the jar on the blender
and turn counter clockwise
until jar is released from the
bottom
Liquid is leaking from
bottom of jar.
Gasket is either
missing or not in
place correctly.
Check that jar is assembled
correctly.
Appliance does not
turn on.
Appliance is not
plugged in.
Check that appliance is
plugged into a working
outlet.
Mixture in blender
does not seem to be
blending.
Not enough liquid in
mixture being blended
or too much ice.
Turn the blender off and
use a rubber spatula to
redistribute the food; add
some liquid and PULSE
the mixture to aid in the
blending process.
Herbs or bread are
sticking to sides
of blender and not
getting chopped.
Blender jar, food to be
chopped or blade are
not dry.
Always make sure that the
jar, the blade and the food to
be chopped are dry.
Jar separates from
bottom when being
removed from
blender. Liquid spills
onto counter.
Jar was twisted when
being removed from
base of blender.
When removing jar from
blender base, simply lift up;
do not twist.
Food chopped is too
fine or watery.
Food is over
processed.
Use PULSE in short bursts
or blend for a shorter time.
SPEED CHART
Pulse/Off: Use for thick mixtures
Fast Clean: Combine drop of dishwashing liquid and hot water to clean blender
Stir: Liquefy frozen juices, drink mixes and condensed soups • Prepare salad
dressings • Puree hot liquids
Grate: Grate hard cheeses and coconut • Make superfine sugar • Make cookie,
cereal and bread crumbs • Grind coffee beans, spices and chocolate
Puree: Blend protein drinks • Puree baby foods – fruits and vegetables
Beat: Beat eggs for omelets and custards
Crumb: Make cookie, cereal and bread crumbs
Liquefy: Liquefy frozen drinks
Chop: Chop fruits and vegetables • Chop cooked meats • Chop nuts,
coarse-to-fine
Whip: Mix puddings • Combine pancake and waffle batter or mixes • Beat eggs
for omelets and custards
Blend: Prepare sauces • Remove lumps from gravies
HI/LOW: Select to change speed between Hi and Low • Hi – the button is out
• Low – the button is in.
How does state law relate to this warranty?
• This warranty gives you specic legal rights. You may also have other rights that vary from
state to state or province to province.
Código de fecha / Date Code
© 2009 - 2010 Applica Consumer Products, Inc.
Made in People’s Republic of China
Printed in People’s Republic of China
Fabricado en la República Popular de China
Impreso en la República Popular de China
Importado por / Imported by:
APPLICA AMERICAS, INC.
Av. Juan B Justo 637 Piso 10
(C1425FSA) Ciudad Autonoma de Buenos Aires
Argentina
C.U.I.T No. 30-69729892-0
Importado por / Imported by:
APPLICA MANUFACTURING, S. DE R. L. DE C. V.
Presidente Mazarik No111, 1er Piso
Col. Chapultepec Morales, Mexico D.F
Deleg. Miguel Hidalgo
CP 11570
MEXICO
Teléfono: (55) 5263-9900
Del interior marque sin costo
01 (800) 714 2503
MODELS/MODELOS
❍
B
L10450H
❍
B
L10450HB
❍
B
L10450HR
CustomerCare Line:
USA/Canada
1-800-231-9786
Mexico
01-800 714-2503
Accessories/Parts
(USA / Canada)
Accesorios/Partes
(EE.UU / Canadá)
1-800-738-0245
For online customer service
and to register your product, go to
www.prodprotect.com/applica
CRUSH MASTER
®
450-WATT
BLENDER
LICUADORA
CRUSH MASTER
®
DE 450 WATTS
450 W 120 V~ 60 Hz
Sello del Distribuidor:
Fecha de compra:
Modelo:
Comercializado por:
Applica Manufacturing, S. de R. L. de C.V.
Presidente Mazarik No 111, 1er Piso
Col. Chapultepec Morales, Mexico D.F
Deleg. Miguel Hidalgo
CP 11570
MEXICO
Servicio y Reparación
Art. 123 No. 95
Col. Centro, C.P. 06050
Deleg. Cuauhtemoc
Servicio al Consumidor,
Venta de Refacciones y Accesorios
01 800 714 2503