Black & Decker ET202 Toaster User Manual


 
English
Connect the appliance to a suitable
electrical supply. Push the pop-up lever (6)
gently down until it locks in position.
The bread will be lowered as the lever
moves down. The browning control sets
the time that the toaster will operate.
After that time has elapsed, the pop-up
lever will be released & the toast will
automatically lift to the top of the slot.
Note: The toast will be hot, use caution
when removing hot toast from the
appliance.
If the toast is too dark, move the browning
control to a lower number before
continuing. If the toast is too light, move
the browning control to a higher number
before continuing.
Note: Surfaces may be hot during use and
during the cool down period
Disconnect the appliance from the
electrical supply.
Frozen Bread
Frozen bread can be used to make toast
using the “Frozen Bread” function.
To toast frozen bread, place the bread into
the bread slots and select the desired
Browing Setting. Push the pop-up lever
down until it clicks into place then press
the Frozen Button (2).
Re-Heat
The toaster allows you to reheat toast
without additional toasting. To reheat, place
toast into bread slots, Push the pop-up
lever until it clicks into place and press the
Reheat Button (3).
Cancel
The toasting operation can be halted at any
time by pressing the cancel button (4)
Maintenance
Your Black & Decker tool has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any
maintenance or cleaning of the tool,
disconnect the appliance from the power
supply. Ventilation slots should be cleaned
occasionally with a clean, dry paint brush.
Cleaning
Disconnect the appliance from the
electrical supply.
Pull the crumb tray (7) from its location &
empty any crumbs into a suitable container.
The crumb tray may be washed in warm
soapy water. Rinse with clean water and
dry thoroughly with a dry soft cloth.
Re-fit the crumb tray in its slot, ensuring
the walls on the tray are facing the top.
All other parts should be cleaned with a
damp cloth & be dried thoroughly using a
dry soft cloth before re-use.
Note: Do not use abrasives or chemical
cleaners on any part of this appliance.
Technical Data
-6-
ET202
Voltage V 220-240
Power W 800
Weight Kg 1.1