Blomberg IWD 1004 ET Refrigerator User Manual


 
EN
27
Recommendations for
preservation of frozen food
• Prepacked commercially frozen food
should be stored in accordance with the
frozen food manufacturer’s instructions
for a
( 4 star) frozen food storage
compartment.
• To ensure that the high quality
achieved by the frozen food
manufacturer and the food retailer is
maintained, the following should be
remembered:
1.Put packets in the freezer as quickly as
possible after purchase.
2.Ensure that contents are labelled and
dated.
3.Do not exceed “Use By”, “Best Before”
dates on the packaging.
If there is a power failure do not open
the freezer door. Even if the power failure
lasts up to the time specified on Type
Label (inside left of the refrigerator),
frozen food will not be affected. In case
the failure lasts longer, the food must
be checked and when necessary, must
be consumed immediately or must be
frozen after cooked.
Defrosting
The fridge and freezer compartments
defrost automatically.
Replacing the Interior Light
Bulb
Should the light fail to work, proceed as
follows:
1. Switch off at the socket outlet and pull
out the mains plug.
Remove all shelves and drawers for easy
access.
2. Illumination covers in freezer and
fridge sections are opened by pressing
by hand; first release one side and then
the other by pressing on the sides as
shown in the figures.
3. First check that the bulb has not
worked loose by ensuring that it
is screwed securely in the holder.
Reinsert the plug and switch on. If the
bulb works, reinstall the light cover by
inserting the rear lug and pushing up to
locate the front two lugs.
4. If the light still fails to work, switch
off at the socket outlet and pull out the
mains plug. Replace the bulb with a new
15 watt (max) screw cap E14 (SES) bulb.
5. Carefully dispose of the burnt-out light
bulb immediately.
Replacement light bulb can easily be
obtained from a good local electrical or
DIY store.