Filter
Top Products
READ AND SAVE THESE INSTRUCTIONS
This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electrical shock, this plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.
WARNING - To reduce the risk of fire or electrical shock, do not use this product
with any solid-state speed control device( Dimmer
Switch).
$
Unplug fan before cleaning.
$ Use common sense when using this and/or any electrical appliance.
$ Do not position too close to any objects which may be drawn into the blades and
stop the air flow.
$ Do not use outdoors
$ Do not use on wet surfaces or immerse in water. Never allow water to drip into
the motor housing.
$ Do not use if power supply cord becomes frayed or brittle.
$ Do not use gasoline, thinners or other harsh chemicals to clean fan.
$ Do not use near fireplaces, furnaces, stoves, or other high temperature heat
sources.
Specifications
$ 120 volts, 60Hz, 0.38 Amp.
$ 4 speeds 1200 rpm low
1350 rpm
1600 rpm
1850 rpm high
$ 6 ft. power cord
OWNER=S MANUAL
Model 967
CARE AND MAINTENANCE
This Caframo fan has been designed for many years of
problem free operation. There are however a few simple
things that you can do to enhance the life of your fan.
1. Keep the air vents clear and free of dirt. These vents are
necessary to keep the motor cool while in use. Unplug the
fan, and use a vacuum to remove any dirt from the vents.
2. Replace the fan blade should it become damaged.
TO REPLACE A DAMAGED FAN BLADE
1. Holding the body of the fan in one hand, grasp the
damaged blade in your other hand, and pull the blade off
the motor shaft.
2. Firmly grasp the new blade and push it straight onto the
motor shaft as far as it will go.
To order a replacement fan blade contact:
Customer Service
Caframo Ltd.
R.R.#2
Airport Road
Wiarton, Ontario, Canada
Phone: 1-800-567-3556
Fax: 519
-
534
-
1088
OPERATION
1. To operate the fan, turn control knob to first setting
for low speed, last setting for highest speed.