Filter
Top Products
Cleveland
™
P
roject ________________________________
I
tem __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
ELECTRIC KETTLES
SECT. VIII PAGE 3
0707
Cleveland Standard Features
■ Manual tilting, balanced design
■ Space saving design through shared, center console
■ Balanced, attractive appearance
■
Self-contained, easily installed - needs only an electrical hook-up
■ Steam jacket filled with treated water, venting and/or refilling is
not required
■ Accurate, consistant solid state temperature controls (mechani-
cal thermostate not as accurate) - less than ±1°C variance
(ideal for simmering). Operating temperature range from 145
° -
260°F (63°C - 127°C)
Control panel includes:
• LED indicator for heat cycle • LED indicator for low water
• Power ON/OFF switch • Adjustable temperature control dial
■ Water resistant controls, splash-proof construction
■ Large pouring lip for high capacity and chunky products
■ Re-inforced rolled rim design prevents damage to kettle rim,
eliminates "bar rim designs"
■ Welded-in heating elements, (holds vacuum better, won't leak
or loose water)
■ Easily cleaned: kettle and all exterior surfaces are of type 304
stainless steel with an #4 finish
■ Rear mounted easy access pressure gauge and pressure relief
valve to prevent tampering. Color coded easy to read pressure
gauge with "green" and "vent air zone"
■ 50 psi steam jacket rating for higher cooking temperatures
■ 50 psi safety valve
■
Solid state water level control (no sight glass gauge to break or leak)
■ Splash proof element cover with a double gasket seal
■ Self locking marine type tilting mechanism prevents acci-
dental spills. Balanced design makes it easy to tilt
■ Standard for TKET-6-T and TKET-12-T is 208-240 volts, 60 Hz,
3-phase, 3-wire. Models TKET-6-T and TKET-12-T are field
rewirable to single phase. (Model TKET-3-T available in single
phase, 2-wire only).
■ Typical approvals include UL., CSA, CE, NSF and ASME
Options & Accessories
❐ Lift Off Covers (CL)
❐ Common Hot and Cold (DPK) or Cold only (SPK) Water Faucet
with Swing Spout. Requires Mounting Bracket (FBKT)
❐ 316 Stainless Steel Kettle Liner for high acid products (316-G)
❐ High wattages (HW) and special voltages (see back page)
❐ Cooking Baskets (BS)
❐ Food Strainers (FS)
❐ Measuring Strips (MS)
Shall be CLEVELAND, electric twin kettles, Table Type, self-con-
tained, tilting, Model TKET - _____ - T; _____ gallons each, _____ KW,
_____ volts, _____ Hz, 3 phase/3 wire or single phase/2 wire:
with
Splash Proof Solid State Temperature (±1° C) and Safety Control
System in plug-in Module including L.E.D. indicators,
Large
Pouring Lips, Rear mounted Pressure/Vacuum Gauges,
Permanently filled Steam Jackets, 50 psi Steam Jacket Ratings and
Safety Valves. Optional Lift Off Covers.
❐ Stainless Steel Equipment Stand with Drain Drawer and Splash
Shield (ST-42 for TKET-3-T & TKET-6-T),
(ST-55-t for TKET-12-T)
❐ Kettle Markings (KM)
❐ Protective Control Panel (PCE)
Short Form Specifications
Shown with optional
lift off covers
TABLE TYPE
TWIN ELECTRIC KETTLES
“
SPLASH PROOF SERIES”, SELF-CONTAINED, 2⁄3 STEAM JACKETED,
Per Kettle: 3, 6 or 12 GALLONS (11, 23 or 45 LITERS)
MODELS: TKET-3-T TKET-12-T
TKET-6-T