Filter
Top Products
One Conair Drive ● Pittsburgh, PA 15202 ● 412-312-6000 ● FAX 412-312-6227 ● www.conairnet.com
B
A
GRAVIMETRIC BATCH BLENDERS
AutoWeigh GB240 and GB440 Models
SPECIFICATION NOTES:
Each bin compartment can support a 12-inch to 15-inch loader or vacuum receiver.
* Throughput rates are based on using no more than 2% additive or colorant material total in either the CAF3 compressed air or F03 auger
feeder. Always refer to the selection guide for specific throughput information.
†
The optional flow control valve adds 6.5 in. {165 mm} to the total height.We recommend using the flow control valve when mounting the
blender to a stand, surge bin or hopper.
‡
Feeders will increase width and depth dimensions. Please refer to feeder specifications.
SPECIFICATIONS
TPBS012/1199
A
B
B
C
C
1
2
4
3
FRONT VIEW
SIDE VIEW
TOP VIEW
(4) 9/16 in.
{14.3 mm}
diameter
bolt holes
3 in. {76.2 mm}
diameter
through hole
8 in. {203.2 mm}
square bolt pattern
10 in.
{254 mm
14 in.
{355.6 mm}
IB04
MOUNTING
INTERFACE
CONTROL
MODELS GB240 GB241 GB242 GB440 GB441 GB442
Performance characteristics
Batch size lbs {g} 4.4 {2000} 4.4 {2000} 4.4 {2000} 8.8
{4000}
8.8
{4000}
8.8
{4000}
Maximum throughput
lbs/hr {kg/hr}* 993 {451} 678 {308} 518 {235} 1645 {748} 983 {446} 704 {319}
Bin capacity - main ingredient ft
3
{liter}
3.5 {99.12} 3.5 {99.12} 3.5 {99.12} 3.5 {99.12} 3.5 {99.12} 3.5 {99.12}
Bin capacity - minor ingredient ft
3
{liter}
NA 0.5 {14.16} 0.5 {14.16} NA 0.5 {14.16} 0.5 {14.16}
Maximum number of materials 4 5 6 4 5 6
Number of discharge valves 4 4 4 4 4 4
Number of additive feeders 0 1 2 0 1 2
Control software (# of components) 4 or 12 12 12 4 or 12 12 12
Dimensions inches {mm}
A - Height above mounting plate
†
59.75 {1517.5} 59.75 {1517.5} 59.75 {1517.5} 65.75 {1669.9} 65.75 {1669.9} 65.75 {1669.9}
B - Width
‡
34 {863.6} 34 {863.6} 34 {863.6} 34 {863.6} 34 {863.6} 34 {863.6}
C - Depth
‡
34 {863.6} 34 {863.6} 34 {863.6} 34 {863.6} 34 {863.6} 34 {863.6}
D - Controller height 11.25 {285.75} 11.25 {285.75} 11.25 {285.75} 11.25 {285.75} 11.25 {285.75} 11.25 {285.75}
E - Controller width 12.25 {311.15} 12.25 {311.15} 12.25 {311.15} 12.25 {311.15} 12.25 {311.15} 12.25 {311.15}
F - Controller depth 8.19 {208.03} 8.19 {208.03} 8.19 {208.03} 8.19 {208.03} 8.19 {208.03} 8.19 {208.03}
Weight lbs {kg}
Installed 230 {104} 270 {122} 310 {140} 255 {116} 295 {134} 335 {152}
Shipping 335 {152} 375 {170} 415 {188} 360 {163} 400 {181} 440{200}
Voltage Total amps
120V/1 phase/50-60 Hz 4.8 5.8 6.8 4.8 5.8 6.8
240V/1 phase/50-60 Hz 2.5 3.0 3.5 2.5 3.0 3.5
Compressed air requirements
Discharge valves 80 psi @ 0.2 ft
3
/min. {5.5bars @ 0.09 liters/sec}, 1/4 in. NPT fitting
Compressed air feeder 40 psi @ 2 ft
3
/min. {2.8bars @ 0.94 liters/sec}, 1/4 in. NPT fitting
APPENDIX B