Cuisinart SCO-60C Can Opener User Manual


 
IB-5736-CAN
LIMITED THREE-YEAR WARRANTY
This warranty supersedes all previous warranties on the Cuisinart
®
product. This
warranty is available to consumers only. You are a consumer if you own a Cuisinart
®
product that was purchased at retail for personal, family or household use. This
warranty is not available to retailers or other commercial purchasers or owners. We
warrant that your Cuisinart
®
product will be free of defects in material or workmanship
under normal home use for three years from the date of original purchase.
For warranty purposes, we would like to suggest that you register your product
on-line at www.cuisinart.ca to facilitate verification of the date of original purchase.
However, should you not wish to register on-line we recommend that you maintain
original receipt indicating proof of purchase. In the event that you do not have proof
of purchase date, the purchase date for purposes of this warranty will be the date of
manufacture.
When calling our Authorized Service Centre for in warranty service please make
reference to your model number and the manufacturing date code. This information
can be found in the rating area on the body or underneath the base of your unit.
The model number will follow the word Model: SCO-60C. The manufacturing date
code is a 4 or 5 digit number. Example, 40630 would designate year, month & day
(2004, June 30th).
If your product should prove to be defective within the warranty period, we will repair
it or, if we think it necessary, replace it. To obtain warranty service, please call our
Consumer Service Centre toll-free at 1-800-472-7606 or write to:
Cuisinart Canada
156 Parkshore Drive
Brampton, Ont. L6T 5M1
To facilitate the speed and accuracy of your return, please also enclose $10.00 for
shipping and handling of the product. Please also be sure to include a return address,
description of the product defect, product serial number, and any other information
pertinent to the product’s return. Please pay by cheque or money order.
NOTE: For added protection and secure handling of any Cuisinart
®
product that is
being returned, we recommend you use a traceable, insured delivery service.
Cuisinart cannot be held responsible for in transit damage or for packages that are
not delivered to us. Lost and/or damaged products are not covered under warranty.
Your Cuisinart
®
product has been manufactured to strict specifications and has been
designed for use with the Cuisinart
®
authorized accessories and replacement parts
for your model.
These warranties expressly exclude any defects or damages caused by accessories,
replacement parts or repair service other than those that have been authorized by
Cuisinart. These warranties exclude all incidental or consequential damages.
BEFORE RETURNING YOUR CUISINART PRODUCT
Important: If the nonconforming product is to be serviced by someone other than
Cuisinart’s Authorized Service Centre, please remind the servicer to call our
Consumer Service Centre to ensure that the problem is properly diagnosed, the
product serviced with the correct parts, and to ensure that the product is still under
warranty.
© 2005 Cuisinart
Cuisinart
®
is a registered trademark of Cuisinart
156 Parkshore Drive, Brampton, Ontario. L6T 5M1.
Printed in China.
05CC25025
Instruction Booklet
SCO-60C
Deluxe Stainless Steel Can Opener
CLEANING INSTRUCTIONS
1. Be sure the plug has been removed from outlet.
2. Remove can opener lever by lifting and pulling
toward you. Wash by hand with hot, sudsy water
or place in the top shelf of a dishwasher.
Dry thoroughly.
3. Wipe body of can opener with damp cloth.
(Caution: Do not immerse in water.)
4. Replace can opener lever by holding in the upright
position and snapping back into place.
SUGGESTIONS
This can opener will open all standard size cans.
It should not be used on cans that have alternate
methods of opening (including but not limited
to pull-tabs, rolling key and peel-off foil). It also
should not be used with rimless cans or cans with
angled corners.
Cans with aluminum lids will not adhere to magnet.
If there is a dent in the rim of the can, open other side
or place the Power Cut
TM
blade beyond the dent. If the
can opener stalls, use a light touch to turn the can to
aid the cutting process.
sco60c_ib.qxd 3/15/05 9:11 AM Page 1