12
Operating Your Dishwasher
Various functions and settings on your dishwasher
canbeconguredbytheuser.Tochangeoneofthe
settings:
1. Open the door slightly. If the main power switch
ison,turnitoffandwaitaboutveseconds.
2. Turn on the main power switch. Wait for the
numbers to appear on the display.
3. Withinvesecondsofthenumbersappearingon
thedisplay,holdyourngeronthePROGRAM
touchkey.Waitforthebeepconrmingthekey
touch, then touch the Dry key at the same time.
Touch both keys until the Daily and Rinse and
Holdindicatorlightsash.
Control Panel Settings
Function Menu # Settings Description
Child lock 1
0 (off)/
1 (on)
When the child safety lock is engaged, the control panel touch keys do
notworknormally,makingitmoredifculttoprogramandstart.See
page 3 for instructions on how to temporarily bypass the child lock.
End beep
volume
2 0 (off) to 4
Changes the volume of the beep used to indicate when a cycle is
nishedorwhenafaulthasoccurred.
Key touch
beep volume
3 0 (off) to 4
Changes the volume of the beep emitted each time a key on the
control panel is touched.
Display
contrast
4 -1 to 3
Adjusts the contrast of the display.
Rinse aid
dispenser
5 0 (off) to 6
Adjusts the amount of rinse aid dispensed during each cycle.
4. While the Daily and Rinse and Hold lights are
ashing,touchSTART/STOP repeatedly until the
menu number for the desired function appears
on the left side of the display.
5. Touch PROGRAM repeatedly until the desired
setting for the function being set appears on the
right side of the display.
6. Touch START/STOP repeatedly to save the
setting and exit the menu. Repeat the above
steps to change the settings for a different
function.
Menu #Rinse and HoldDaily
Dry
Setting
Display