Dacor PD24AG Dishwasher User Manual


 
4
Preparing for Installation
WARNING
Observe all governing codes and ordinances during
planning and installation. Contact your local building
department for further information.
Preparing the Location
Carefully check the location where the dishwasher is to be
installed. Put it in a location with convenient access. Make
certain that electrical power can be provided in the selected
location.
Plan the installation so that the appliance can be removed
if service is required.
IMPORTANT: Follow all cabinet and countertop minimum
dimensions shown below to insure safe operation.
Prepare the installation location as shown below. All
minimum product dimensions be must met or exceeded
(see page 3). Dimensions shown provide minimum
clearances, unless otherwise noted.
The floor must be level and all cut-out surfaces must be
at right angles. The dishwasher must be secured to the
adjacent cabinets using the anti-tip brackets for safety and
proper operation.
Fasten anti-tip anchors into material
under counter top and adjacent cablinets
Access Hole for Utilities
90°
90°
24” (61.0 cm)
24” (61.0 cm)
8” H X 5“ D
(20.3 cm X 12.7 cm)
33 3/4”
(85.7 cm)
to
36 1/4”
(92.1 cm)
Min. Countertop 25" (63.5 cm)
CUT-OUT FRONT VIEW CABINET INSTALLATION SIDE VIEW