Delfield 403 Standard Freezer User Manual


  Open as PDF
of 2
 
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
403
Self-contained compact work top freezers
The refrigeration system on this
equipment uses HFC--404A refrigerant.
Short form specications
Exterior top shall be one-piece, 22-gauge stainless steel with front edge turned down
to form nosing and rear edge turned up to form a 2" (5.1 cm) thick by 4" (10.2 cm) high
backsplash.
Exterior back and bottom shall be one-piece 24-gauge galvanized metal. Exterior ends
shall be 22-gauge stainless steel.
Base interior shall be one-piece thermoformed ABS plastic material, with integral shelf
supports. Base shall be fully insulated with high-density foamed-in-place polyurethane.
Refrigeration system shall use HFC-404A refrigerant. Compressor shall be ¢ h.p., with
condenser coil and hot gas condensate evaporator mounted on rear of cabinet. Evapora-
tor coil and temperature control shall be mounted on the interior rear wall of the cabinet.
Refrigerant ow shall be controlled by a capillary tube. Cabinet shall maintain
–5°F to 0°F (–21°C to –18°C) interior cabinet temperature.
Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall have a 7' (2.1
m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on rear of
cabinet, centered left to right, 16" (40.6 cm) above oor.
Equipment shall be mounted on 6" (15.2 cm) high metal legs with black enamel nish.
THE FOLLOWING APPLIES TO MODEL 403 (SINGLE DOOR) ONLY:
Doors shall have a 22-gauge stainless steel exterior, with a thermoformed ABS plastic
interior liner, and shall be fully insulated with foamed-in-place polyurethane. Door
handles shall be black, recessed and shall extend the full length of the top of the door.
Cabinet shall have (2) adjustable epoxy-coated wire shelves installed.
Optional accessories & modications
Stainless steel back
Plastic laminate on front
Additional wire shelves
Stainless steel single-tier overshelf
3.5" (8.9 cm) diameter casters
5" (12.7 cm) diameter casters
Door lock
Full-size composite-type cutting top
220 volt, 50 Hertz electrical system
Model 403