Filter
Top Products
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Exterior top is one-piece, 22-gauge stainless steel with
integral square nosing on the front.
Exterior back and bottom are two-piece 24-gauge
galvanized steel.
Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with shelves
supported on plugs. Interior back is one-piece 22-gauge
stainless steel. Interior bottoms are thermofoamed ABS
plastic. Base is fully insulated with high-density foamed in
place polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/5 H.P., with condenser coil and hot gas condensate
evaporator mounted on rear of the cabinet. Evaporator
coils are located on the interior rear wall of the cabinet.
Refrigerant flow is controlled by a capillary tube. Cabinet
maintains an interior cabinet temperature of 36°F to 40°F
(2°C to 4°C).
ACT control. ACT electronic, solid state control, mounted
on the exterior rear of the cabinet, allows unit to maintain
precise temperatures in heavy duty conditions.
Electrical connection is 115 volt, 60 Hertz, single phase. Unit
has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
Casters Equipment is mounted on 2” (5.08cm) (2.5” ride
height), diameter plate casters with front two locking.
Door has a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner.
Drawers have 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Top drawer holds two full size 12”
x 20” (30.5cm x 50.8cm), 4”-6" (10.2cm-15.2cm) deep pans.
Bottom drawer holds two full size 12 x 20", 4” deep pans. Pans
are supplied by others.
Specifications
Standard Features
Options &
Accessories
• All 4400 and 4500 Series units are 100%
front breathing, which allows the unit to
be pushed against a wall or built into a
cabinet or an existing line up
• Durable, rugged stainless steel sides, top
and front
• Features Delfield’s exclusive ABS interior
(on sides). ABS is extremely durable - it
won’t dent, chip or corrode and is backed
by a limited lifetime warranty
• Heavy duty self-closing hinges
• “D” prefix models feature Delfield’s
exclusive new drawer system. Drawers are
backed by a 10-year warranty on the track
assembly
• Environmentally friendly R404A refrigerant
• High density foamed in place
polyurethane keeps energy costs low
• Black recessed quick grip handle
• Standard on 2” casters for easy cleaning
and installation
• 60-cycle single phase electrical system
• 7’ cord and plug supplied
• Cord spring relief - prevents cord rollover
• One epoxy coated wire shelf standard,
installed per door section
• ACT solid state electronic control
• One year parts and 90 day labor standard
warranty.
• 4464N Two section refrigerator with doors
• D4464N Two section refrigerator with drawers
Models
4464N Flat Top
Front-Breathing Flat Top Refrigerated Base
4464N Flat Top
• Flat lift off cover
• 18” wide single tier overshelf
• Stainless steel finish on back
• Plastic laminate on front
• Additional wire shelves
• Door lock
• Exterior thermometer
• Interior lights
• Glass door(s)
• *220V/50 Hertz electrical system
* Inclusion of this option will
alter electrical specifications
of the unit.
4464N