Delfield ST4560N Freezer User Manual


 
ST4560N FRONT-BREATHING SELF-CONTAINED FLAT TOP FREEZERS
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
ST4560N FLAT TOP
Front-Breathing Self-Contained Compact Flat Top Freezers
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date ____________________
MODELS:
ST4560N Single section Freezer
Flat top with a door
ST4560N
SPECIFICATIONS
Exterior top is one-piece, 22-gauge stainless steel
with integral square nosing on the front.
Exterior back and bottom are two-piece 24-gauge
galvanized steel.
Exterior ends are stainless steel.
Interior sides of door models are thermoformed ABS
plastic with integral shelves supports. Interior back is one-
piece 22-gauge stainless steel. Interior bottom and top
are thermoforned ABS plastic. Base is fully insulated with
high-density foamed in place polyurethane.
Refrigeration system uses HFC-404A refrigerant.
Compressor is 1/5 H.P., with condenser coil and condensate
evaporator mounted on rear of the cabinet. Evaporator
coil are located on the interior rear wall of the cabinet.
Refrigerant flow is controlled by a capillary tube. Cabinet
maintains an interior cabinet temperature of -5°F to 0°F
(-20°C to -18°C).
Electrical connections are 115 volt, 60 Hertz, single
phase. Unit has a 7’ (2.1m) long electrical cord and NEMA
5-15P plug.
Casters: Equipment is mounted on 2” (5.08cm) diameter
front locking plate casters. 2.5” (6.35cm) ride height.
Doors have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet of door
models has one adjustable epoxy-coated wire shelf.
STANDARD FEATURES
All 4400 and 4500 Series units are 100% front breathing,
which allows the unit to be pushed against a wall or built into
a cabinet or an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
Heavy duty self-closing hinges
“ST” prefix models have a 4” stainless steel backsplash
Environmentally friendly R404A refrigerant
High density foamed in place polyurethane keeps energy
costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
60-cycle single phase electrical system
7’ cord and plug supplied
One epoxy coated wire shelf standard, installed per door
section
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
OPTIONS AND ACCESSORIES
Flat lift off cover
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Interior lights
Glass door(s)
*220V/50 Hertz electrical system
* Inclusion of this option will alter electrical
specifications of the unit.