10
coffee.
C5. OKicon:toenableandconrmtheselected
function.
C6. icon: to rinse or deliver hot water.
C7. HOT MILK icon: to deliver a cup of steamed
milk.
C8. ITALIAN MACCHIATO icon: to deliver a
shot of espresso with a small amount of
foam on top.
C9. LONG icon: to deliver one cup of
C10. CAPPUCCINO icon: to deliver a
cappuccino.
C11. LATTE icon: to deliver a latte.
C12. P icon: to access the programming menu.
C13. ESC icon: to exit the selected function in
the menu.
C14. icon: to select the coffee’s strength.
C15. icon: to select the coffee size.
C16. icon: to scroll backwards through the
programming menu.
Information : A light touch is enough to
activate the icon.
PRELIMINARY CHECKS
Controls after transport
After removing the packaging, make sure the
product is complete and undamaged and that all
accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Service.
Installing the appliance
Important!
When you install the appliance, you should follow
the safety warnings below:
• Theappliancegivesoffheat.Afterpositioning
the appliance on the work top, leave a space
of at least 1 in (3 cm) between the appliance
and the side and rear walls and at least 6 in
(15 cm) above the coffee maker.
• Waterpenetratingtheappliancecouldcause
damage. Do not place the appliance near
taps or sinks.
• The appliance could be damaged if the
water it contains freezes. Do not install the
appliance in a room where the temperature
could drop below freezing point.
• Arrangethepowercableinsuchawaythat
it cannot be damaged by sharp edges or
contact with hot surfaces (e.g. electric hot
plates).
Connecting the appliance
Important! Check that the power outlet
supply voltage corresponds to the value
indicated on the rating plate on the bottom of the
appliance.
Connect theappliance to anefciently earthed
and correctly installed outlet with a minimum
current rating of 12A only. If the power outlet
does not match the plug on the appliance, have
the outlet replaced with a suitable type by a
qualiedprofessional.