Filter
Top Products
3
Installing the Mini kegerator
Installation
Carefully unpack all parts.
Place the unit on a flat and level surface. It will work best in a room
temperature environment (70°F), away from the sun and other heat
sources, and with 3” of clearance between all sides of the unit and
other objects for ventilation.
Install the drip tray by sliding it partially underneath the main unit
(align the “tab” sticking out of the drip tray assembly with the notch
in the underside of the main unit).
Install the dispenser handle by screwing it onto the dispenser head.
There is also a circular top that magnetically attaches directly to the
top of the dispenser handle. Place this on the dispenser handle.
Now select the appropriate power cord (three prong grounded 115V
or the 12V DC plug [cigarette lighter adapter]). Plug the power cord
into the back of the unit, and then plug the other end into your
power source. Check to make sure the unit is on by looking at the
LED in front of the unit. If the LED is lit, your unit is powered up.
We suggest you clean the lines prior to tapping your first mini
keg, and cleaning them again after every mini keg.
Note that this mini kegerator ships with the connections to tap and
enjoy Heineken
®
brand DraughtKeg™ 5 Liter mini kegs. This is the
most popular and widely-available 5 Liter mini keg. Heineken
®
brand DraughtKeg™ 5 Liter mini kegs are already pressurized and
need no additional CO
2
to tap them. With the optional upgrade kit,
you can tap and enjoy all commercially available 5 Liter mini kegs.
IMPORTANT: Do not remove any safety, warning, or product information
labels from your mini kegerator.