Filter
Top Products
Operating Instructions
26
What to do, if ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call an engineer to resolve a of fault
listed here, or to repair a fault caused by incorrect use or installation, a
charge will be made even if the appliance is in guarantee.
...warning tones indicating a fault in the dishwasher.
• If one or two repetitive warning tones can be heard after the start of
a programme, they are indicate of a fault in the dishwasher that you
can probably rectify yourself. The door of the dishwasher is automat-
ically unlocked when the tones sound.
After rectifying the fault, press the button for the wash programme
that has been started and close the door of the dishwasher. The wash
programme should continue.
If the same warning tone is heard again, please contact AEG Service
Force.
• If more than two repetitive warning tones are heard after the pro-
gramme start, please contact AEG Service Force. The Service Centre
will need to know the number of tones and whether indicators on the
control and display field are flashing.
Symptom Possible Cause Solution
1 warning tone that is con-
tinuously repeated can be
heard and the programme
indicator on the display and
control panel are flashing.
Tap is closed. Open tap.
The filter (where
present) in the threaded
hose fitting is blocked.
Clean the filter in the
threaded hose fitting.
The water inlet hose is
not correctly laid.
Check hose installation.
2 warning tones that are
continuously repeated can
be heard.
The sink outlet is
blocked.
Clean the sink outlet.
The water drain hose is
not correctly laid.
Check hose installation.
3 warning tones that are
continuously repeated can
be heard.
The leak prevention sys-
tem has been triggered.
Close the tap and contact
AEG Service Force.