Electrolux 534093 Dishwasher User Manual


 
Approval: ___________________________________________
534090 (WT66BL208) 66 Conveyor Dishwasher with
Built in Booster. Left to Right - 208V
534091 (WT66BR208) 66 Conveyor Dishwasher with
Built in Booster. Right to Left - 208V
534092 (WT66BL240) 66 Conveyor Dishwasher with
Built in Booster. Left to Right - 240V
534093 (WT66BR240) 66 Conveyor Dishwasher with
Built in Booster. Right to Left - 240V
Item No. ___________________________________
Unit to be Electrolux WT66 Hot Water Sanitizing 66 single tank conveyor
dishwasher with built in hot water booster. Electrical characteristics to be
____ 208 V or ____ 240 V three phase operation. Unit to operate from ___
left to right or ____ right to left. Unit to feature atmospheric built in booster
system with built in rinse booster pump thus guaranteeing rinse pressure
during rinse cycle. Hot water booster temperature rise can be selected
during installation from three options, 40 °F rise (140 °F incoming water
temperature), 70 °F rise (110 °F incoming water temperature) or 100 °F
rise (80 °F incoming water temperature). Unit to include 22 pre-wash zone.
Pre-wash zone with powerful 0.5 hp cold water pre wash. Unit to have two
conveyor speeds which can be selected from the control panel by the
operator, 130 racks/hour or 200 racks/hour. Maximum water consumption
at 200 racks/hour of only 83 gal/hour (0.4 gal/rack). Unit to feature large
heat and noise insulated front counter balanced door in pre wash and
wash/rinse sections for easy access of internal components. Powerful 2
HP wash pump and specially designed wash spray arms to guarantee
cleaning. Unit to feature as standard end of day self cleaning cycle. Drain
of water from the machine can be done through the control panel. Large
deep drawn 26 gal wash tank for extended wash sessions.
Covered by Electrolux Platinum Star® Service Program two-year parts
and one-year labor warranty, installation start-up and performance check-
up after one year from installation.
Short Form Specification
Electrolux Professional, Inc.
www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
ITEM # _______________________________________________
MODEL # _____________________________________________
PROJECT NAME #______________________________________
SIS # _________________________________________________
AIA # _________________________________________________
Warewashing
66 Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT66
Main features
Built in hot water booster (top mounted in wash/rinse section).
Water booster temperature rise can be set on site during the installation of the
machine. 40 °F rise (140 °F incoming water temperature), 70 °F rise (110 °F
incoming water temperature) or
100 °F rise (80 °F incoming water temperature).
Atmospheric booster system with air break.
Built in rinse booster pump guarantees constant rinse pressure.
Speed of conveyor can be set through the control panel by the operator.
130 racks/hr or 200 racks/hr.
Large counter balanced inspection doors in pre wash and wash/rinse sections
allow unrestricted all round access to the wash and rinse area. Door is insulated
with injected foam. This adds strength as well as reduces noise and heat loss.
Large filters sloping towards the front to the smaller pressed filter box for quick
removal. Filters feature holes smaller than the concave ant-block wash nozzles so
large food cannot enter and block the wash system. Filters easy to remove from
pre wash as well as wash/rinse sections.
Adjustable feet for full access underneath the machine for cleaning.
Push button self cleaning cycle of the wash and rinse zones for ease of “end of
day” cleaning.
Wash chamber without internal pipes and therefore no hidden dirt traps.
Pre wash chamber without internal pipes and therefore no hidden
dirt traps.
Self draining wash pumps provide maximum hygiene with no smells and all
wash and rinse zones drain automatically at the push of a button.
Powerful 0.5 HP pre-wash pump.
Powerful 2 HP wash pump.
Heavy duty stainless steel wash pump (impeller and housing).
Pre wash section uses cold water so food remains are not “baked” onto the
plates.
Deep drawn pressed 26 gal wash tank with fully rounded corners, sloped
towards the drain to prevent dirt build up provides fast drainage in only a few
minutes. Pressed wash tank with no welded points offer a guaranteed water
tight solution.
Deep drawn pressed 11.8 gal pre wash tank with fully rounded corners.
Dishwasher structure is held together with a solid 2 × 2 stainless steel tube
sub-frame to provide long term sturdiness.
All main components made in heavy duty anti-corrosive 304 type stainless steel:
tanks, panels, pre wash, wash & rinse arms and caps, doors, front, handle, rear
and side-panels and rack transportation system.
Pre wash, wash and rinse arms can be easily removed for cleaning.
IPX5 (NEMA4) water protection ensures no damage from cleaning.
Autostart/stop ensures that the machine runs only when a rack is passing
through it. This reduces both water and energy consumption.
Internal curtains made of silastic material and are not affected by detergent or
heat.
Electronic control panel features large display for reading of wash and rinse
temperatures.
Low water consumption. At 200 racks per hour, the machine uses only
83 gal/hr (0.4 gal/rack).
Machine predisposed for external detergent and rinse aid connections.
Included Accessories
Vent cowls (left and right side).
One open sided dishwasher rack for trays.
Rack for cups.
Rack for dinner plates.
Warewashing
66 Single Tank Conveyor Dishwasher with Built In Hot Water Booster WT66
Warewashing
66 Single Tank Conveyor Dishwasher
with Built In Hot Water Booster WT66
3048424