Electrolux 534109 Dishwasher User Manual


 
Electrolux Dishwashing
Rack Type WTM200
The Electrolux Dishwashing range is produced for customers with the highest conceivable demands for good
efficiency, economy and ergonomics for dishwashing operation. The product range comprises glasswashers,
undercounter dishwashers, hood type dishwashers, rack type dishwashers, flight type dishwashers and pot and
pan washers. The rack type dishwasher range is designed to be easily connected with the equipment included
in the Electrolux Handling System range, to create a functional and ergonomic dishwashing area. The rack type
dishwasher WTM200 has a capacity up to 200 racks per hour with 2 speeds (variable on-site). The range
consists of 6 electrically or steam heated models, available with or without Energy Saving Device (ESD).
534111
EASY TO INSTALL
Solid 3mm square stainless steel
sub-frame with bolt-together
construction that can be delivered
assembled or in modules to be
connected on site.
Stainless steel wash pumps ideal
for heavy duty usage installations.
Brass inlet valves as standard for
extra reliability at high incoming
water temperatures.
All rear positioned water tubes in
stainless steel.
Only one cable for electrical
connection.
Electrical and water connections
centralised in one area.
Service from the front and from
the side.
Pre-arrangements for automatic
detergent dispenser, energy
management device and HACCP
implementation (both basic as well
as integrated system).
FUNCTIONAL ZONES
Separate 45 litre pre-wash zone
first soil scrapping is performed.
Separate zone, at less than 35°C,
without chemicals for maximum
dirt removal and incorporates
automatic partial drain.
Power wash zone with 150 litre
wash tank with 2,2kW wash pump
supplying upper was arms, 1,1kW
wash pump supplying lower was
arms. Maximum water contact
wash arms for best possible
washing result.
Separate wash and rinse zones
so detergent does not mix with the
rinse aid and is always active.
Rinse area equipped with the
DUO-rinse system where the first
ramp is filled by the re-used final
rinse water, to eliminate any trace
of detergent, and the second ramp
is filled by hot fresh water to
guarantee sanitation of the items.
Atmospheric boiler combined
with the rinse booster pump for
perfect rinsing performances in
terms of sanitation, energy saving,
independence from the water
pressure on the network.
Incorporates non-return (air gap
class A) valve.