Electrolux CR42G Pasta Maker User Manual


 
ZANUSSI
P R O F E S S I O N A L
CR 42 AUTOMATIC PASTA COOKERS
SPECIAL MACHINES
CR42G
Supply voltage 230 V, 1N, 50 230 V, 1N, 50 400 V, 3N, 50
Net weight - kg. 386 380 380
Control panel - V 24
auxiliary 0.25 0.25 0.25
Power - kW
Steam consumption at 0.5 bar - kg/h 100
Basket load capacity - kg 20 20 20
Number of baskets 2 2 2
height 410 410 410
depth 640 640 640
width 625 625 625
Usable well dimensions - mm
N° of wells 2 2 2
height adjustment 50 50 50
height 850 850 850
depth 1280 1280 1280
width 1600 1600 1600
External dimensions - mm
Power supply Gas Steam & Electric Electric
CR42G
291161
CR42V
291162
CR42E
291163
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The range consists of 3 gas, steam and
electric models with 2 wells and 2
automatically tilting baskets, ideal for the
cooking in water of pasta, rice, minestrones,
vegetables, boiled meat etc.

FUNCTIONAL AND
CONSTRUCTION
FEATURES
External panelling and load bearing frame
in 304 AISI stainless steel. Cooking well with
rounded corners in 316 AISI stainless steel
and fitted with an overflow pipe. The
combustion chamber is in 309 AISI stainless
steel (CR/42 G). Jacketed well in 18/10
stainless steel (CR/42 V)
Cooking basket and all other parts in
contact with water are made from 316 AISI
stainless steel
Elevating basket which is automatically
tilted at the end of the cooking cycle by an
electromechanic linear activator fed at low
tension (24 V)
Electrovalve with probe to prevent heating
in the case of no water. Automatic ignition
when water reaches minimum level
Electronic control end limit basket
Automatic water filling and automatic
water topping.
Large drainage tap with insulated handle
positioned on the front of the appliance
Lid and handle in 304 AISI stainless steel
fitted on hinges with counter-balancing
springs
Simple and functional control panel
provided with transparent pexiglass protection
Tilting lower panel or easily removed front
panels for quick and easy access to the
working parts
Heating by stainless steel burners
Safety valve and flame failure device for
cutting off the gas flow if the pilot light is
accidentally extinguished (CR/42 G)
Automatic electronic ignition (CR/42 G)
All gas appliances are supplied for use
with natural gas (methane), with LPG
conversion jets supplied as standard
Heating via armoured stainless steel
elements (CR/42 E)
ON/OFF switch with indicator light to show
machine is on (CR/42 E)
Steam supply pressure 0.5 bar (CR/42 V)
Controls and safety unit consisting of
safety valve, depressurising valve and
pressure gauge (CR/42 V)
Steam flow controlled by means of a ball
valve (CR/42 V)
A drainpipe for condensing water for
steam appliances is compulsory
All models comply with the standards
required by the main international approval
boards and are H marked.