Electrolux KFRG400 Fryer User Manual


 
ZANUSSI
P R O F E S S I O N A L
GAS FRYERS - 15 LT
N 700
178115
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 1 1
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 1
BASKET FOR 14/15 LT FRYERS 1 2
INCLUDED ACCESSORIES
Net weight - kg. 55 85
gas 14 28
Power - kW
Maximum Well Capacity -lt 13, 15 13, 15
Thermostat range (min-max) - ºC 105, 185 105, 185
Temperature limiter l l
height 505 505
depth 380 380
width 240 240
Usable well dimensions - mm
N° of wells 1 2
height adjustment 50 50
height 850 850
depth 700 700
width 400 800
External dimensions - mm
Power supply Gas Gas
KFRG400
178114
KFRG800
178115
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 700: a range of over 100 models
for the professional caterer designed
to guarantee the highest level of
performance, reliability, energy
saving, safety standards and
ergonomic operation. These
concepts are reflected in the total
modularity of the range that ensures
numerous configurations, either
free-standing or bridged. N 700
demonstrates how advanced
technology can satisfy the needs of
the professional caterer.
The models detailed on this sheet
are 15 litres fryers in gas version
with one or two wells.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
Stainless steel burners with
optimized combustion, flame failure
device and protected pilot light.
Working temperature from 105ºC
to 185ºC.
Additonal overheat safety
thermostat.
The "V" shaped wells have the
burners attached to the outside
allowing an increased life of the oil,
greater productivity and an easier
cleaning.
All models have right-angled side
edges to allow flush-fitting joins
between units, eliminating gaps and
possible dirt traps.
Worktop in 1,5mm stainless steel.
Front panel in stainless steel with
Scotch Brite finish.
Feet in stainless steel adjustable
in height 50mm.
Doors with handles in stainless
steel.
Oil drainage via a tap into a
drainage container positioned under
the well thus simplifying the
consumed oil management and
guaranteeing the operator safety.
IPX4 water protection.
Main connections can be via the
rear or the base of the unit.
Appliances are supplied for use
with natural gas or LPG. Conversion
jets supplied as standard.