Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
8-6
Section 8. Menu Guide
5900S Radar Level Gauge
See the Rosemount 5900S Reference Manual (Document no. 300520EN) for more information.
Devices >
Uninstall Remove the selected device.
Save
Database to
File
Save the current holding register setup to file. This
function can be useful for saving the current
database as a backup. It can be uploaded to the
device by choosing the Upload Database option.
Upload
Database
Upload a database to the selected device.
View Input
Registers
View input registers. You can choose between a
predefined set of registers or you can specify a
certain range of registers.
View Holding
Registers
View holding (database) registers. You can choose
between a predefined set of registers or you can
specify a certain range of registers.
View
Diagnostic
Register
View diagnostic registers for the selected device.
Restart. Restart the device. The boot software performs an
initialization procedure and memory tests.
Logging Log the diagnostic registers.
Program Download an application program to the device.
Calibrate Use the built-in calibration function to adjust the
still-pipe Correction Factor and the Calibration
Distance.
LPG Setup Configure the device for LPG measurements.
LPG Verify
Reference
Pins
Verify that the distance between actual and nominal
position of the reference pin is within the approved
limit.
Custody
Transfer
Config
(Option)
Configure the level gauge for custody transfer.
Write Protect Protect the holding register database from
unintentional changes.
Properties View and change the current device settings (not in
View Only mode).