Filter
Top Products
42 43
Very long
press
(7 sec.)
This activates the Bluetooth pairing mode. See
section 6.9 describing the pairing sequence.
Bluetooth must be turned off before the Streamer
can enter the pairing mode. Pairing mode is active
for 120 seconds or until the pairing is complete.
Pairing can be cancelled manually with a long
press on the Bluetooth button.
The Streamer can be paired with up to 8 devices at
the same time. When the max number is reached,
the Streamer starts overwriting the oldest pairings.
When not necessary for use, the Bluetooth function can be switched off to
save battery power. (See section 5).
6.7 Connecting to Bluetooth devices
Whenever the Bluetooth function in the Streamer or in the external audio
source, has been turned off , the devices must fi nd and connect to each
other again when turned on.
Reconnection Tip
Normally, two paired Bluetooth devices will fi nd each other when turned
on.
If the devices do not connect automatically or have not been set up to
connect automatically, the devices must be connected manually.
Always turn on the mobile phone before turning on the Bluetooth function
in the Streamer.
Refer to the manual of the mobile phone or audio source for detailed in-
struction on how the device connects and how connecting can be manually
operated.