Filter
Top Products
46 47
4. Enter Pin code
The Streamer code is: 0000 (four zeros)
Upon entering the pin code, the Streamer and the device are now paired.
Depending of the external Bluetooth device, you might also have to manu-
ally activate the connection between the Streamer and the device (e.g. the
mobile phone). This is normally done by selecting “Connect” in the display
menu.
For further Epoq Streamer pairing and product support,
visit www.oticon.com
Mobile phone issues:
After a successful pairing sequence, a symbol should appear in the mo-
bile phone display (e.g. a headphone), indicating that a headset is now
connected to the phone and that the phone can only be used via the
Streamer and hearing instruments.
Diff erent phones have diff erent behaviour when used with a wireless
Bluetooth headset - like a Streamer. If a problem occurs in the connection
between your mobile phone and the Streamer, you should generally consult
your mobile phone manual for detailed trouble shooting.
6.9.1 Clearing stored pairings
If, for some reason, you need to clear all stored pairings in the Streamer,
this can be done by pressing the Bluetooth button and the Volume up
button at the same time for more than 10 seconds.
7. Visual indicators
Light Blinking
description
State description Prerequisites
Phone Blinking
GREEN light
Constant
GREEN light
No light
Phone ringing
Active phone call
No active calls
Streamer is
paired and
connected to
mobile phone