Equator WB 65 Dishwasher User Manual


 
Installation Instructions
19
Electrical Connection
The dishwasher requires a dedicated grounded
electrical supply rated at 120 VAC, 15 amps,
60Hz.
The dishwasher is pre-fitted with a flexible power
supply cord with a three-prong, grounding-type
plug to connect to a grounded outlet.
The power-supply receptacle for the dishwasher
must be installed in a cabinet or on a wall
adjacent to the undercounter space in which the
appliance is to be installed.
Provide an opening, not to exceed a maximum 1-
1/2" (38 mm) diameter, through the cabinet
partition for the attachment plug and cord to
pass through.
Suitably treat the edges of the specified opening
as follows:
Wood cabinet: Edges must be smooth and
rounded.
Metal cabinet: Order special grommet, the
Service Center.
Take care when installing or removing the
dishwasher to avoid possible damage to the
power-supply cord.
Water Connection
The dishwasher is pre-fitted with a direction-
adjustable high-pressure water supply hose that
has 3/4" NPT internal pipe threads.
For your convenience, supplied with the
dishwasher is a 3/8" comp. x 3/4" NPT brass
fitting that adapts the hose connector to a stan-
dard 3/8" compression fitting common to most
household dishwasher water supply shut-off
valves. As an alternative the hose can be
connected directly to a locally sourced 3/4" NPT
male brass connector available in most hardware
stores.
Adjust the direction of the hose and its
connection as it exits the rear of the machine
based on the installation requirements.
Important: Ensure the hose connector on the rear of
the dishwasher is fully tightened before installing.
OR
Shut - off Valve
Washer
3/8" Comp. x 3/4" BSP
Shut - off Valve
3/4" NPT
Water Supply Hose
Water Supply Hose