Fagor America IX LFA-013 SS Dishwasher User Manual


 
When the dishwasher is
in operation and …
- You wish to put an extra
plate in the dishwasher.
- You wish to change the
wash program
9
BASIC RECCOMMENDATIONS
There are a series of issues which must be taken into consideration to help your dishwasher last
longer and wash better.
Fill the dishwasher. Try to make the most of the dishwasher capacity and so reduce
water and electricity consumption and lead to quieter operation.
Position the dishes properly. For optimum wash quality, the water spray arms must
turn freely without obstacles. In the same way, the pieces must be correctly positioned for
the water jet to reach them.
Choice of program. Choose the wash program and the additional functions properly,
according to your needs.
Cleaning. Clean the filters and the water spray arms every three months. Also make sure
that they are correctly refitted.
a
b
c
d
If there is a power cut,
when the power comes
back on the dishwasher
will continue its normal
operation from the point
where it was stopped (it
8
POWER CUTS
has a minimum memory
of 12 hours, depending
on the model).
Except if the change
interferes in the duration of
the selected wash program
or is the delay option. They
you should press the
ON/OFF button ( ), to
change its status.
Please take into consideration that the Start / Pause button
is different to the ON / OFF button.
If you press the ON / OFF button during the wash process,
you must reprogram the dishwasher.
IMPORTANT
1. Press the Pause button.
2. Put the item in the
dishwasher and/or
change the wash
program.
3. Press the Start button.
Once the program has
finished, the End light will
come on and a
continuous beep sounds
for 3 seconds.
7
END OF PROGRAM