Fagor America LFA-65 ITX Dishwasher User Manual


 
El lavavajillas está The
dishwasher is equipped
with a high pressure water
connection pipe with a
3/4 (1.905 cm) directional
internal pipe thread at
normal temperature and
pressure values (NPT).
In order to make its
installation easier, the
dishwasher includes a
3/8” (0.9525 cm) brass
compression part for 3/4
NPT which adapts the
pipe connector to a 3/8”
compression part which
incorporates the majority
of the valves which close
the water connection for
domestic dishwashers.
Alternatively, the pipe can
be coupled directly to a
male 3/4 brass NPT
connector which is
available in most
hardware stores.
Adjust the direction of the
pipe and the connection
which comes out of the
rear part of the appliance
following the installation
instructions.
The hose has to pass
between the wall and the
bottom space at the back
of the dishwasher (b1),
so that it is not squashed
or too rigid (b2).
WARNING
5
English
2
PLUMBING IN
b1 b2
Closing valve
Washer
3/8” Comp x 3/4” BSP
Water connection pipe
Closing valve
3/4" NPT
Water connection pipe