Filter
Top Products
32
Using the rotisserie kit
Important!
The rotisserie kit itself is not supplied but can be ordered separately. The kit is available from the
nearest Fisher & Paykel Authorised Service Centre, Customer Care or through our local website
listed on the back cover. The product number for the rotisserie kit is 85109.
Do not use the meat probe when using the rotisserie kit (the cable could become entangled and damaged).
The rotisserie can be used with ANY function, but we recommend Fan Grill for best results.
1
Prepare the rotisserie supports.
Place the grill tray on the benchtop.
Insert the supports into the lock studs.
Fit the support with the rotisserie shaft on the left hand side of the grill tray with the shaft
on the outside (as shown).
Fit the right support so the support angles inward toward the middle of
the grill tray.
Push the supports all the way down to lock them in firmly.
Lock stud
Shaft
Support
Spit
Housing