Filter
Top Products
45
Care and cleaning
Remove the catalytic panels
Once you have removed the side racks, pull the catalytic panel toward the centre of the oven,
until it is clear of the lower locating nut.
Refitting the side racks and catalytic panels
Once you have cleaned the side racks and catalytic panels, follow the instructions in the ‘Quick
start guide’ under ‘First use’ to refit the catalytic panels, side racks and shelving in that order.
Drop-down upper element (OB60S9 model only)
Important!
Always turn off the oven at the wall before lowering the grill element. Make sure the oven has cooled down
completely before starting.
To lower the upper element: use a flat-head screwdriver or a small coin to loosen the element
fixing screw. The element will now drop down to enable cleaning.
When you have finished cleaning the oven ceiling, raise the element and screw the element
fixing screw back onto the stud. Make sure that the fixing screw is tightened and the element is
held securely in place.
The element itself is self-cleaning.
Catalytic panel
Fixing screw Stud