Filter
Top Products
50
Care and cleaning
After cleaning, replace the door glass panes
When replacing the glass panes, make sure that:
you replace all panes correctly, as shown. Each pane must be in the position described below in
order to fit into the door and to ensure that the oven operates safely and correctly
you take extra care not to bump the edges of the glass against any object or surface
you do not force any of the panes into place. If you are experiencing difficulties replacing the
panes, remove them and start the process again from the beginning. If this still does not help, call
Customer Care.
2
1
3
2
1
3
1
Insert the pane into the lower notch on
the top clamps at the top of the door.
2
Carefully pull the pane toward the top of
the door.
1a
Ensure the pane is the right way up (ie the logo
should be readable at the bottom of the door)
1b
Insert the pane into the lower notch on the
top clamps at the top of the door.
3
Slot the pane into the lower notch on
the bottom clamps at the bottom of the
drawer.
2
Carefully pull the pane toward the top of the
door.
3
Slot the pane into the lower notch on the
bottom clamps at the bottom of the drawer.
Replace the middle pane
(OB60SL9 models only)
Replace the middle pane
(OB60SL11 models only)
Top
Clamp
(lower
notch)
Top
Clamp
(lower
notch)
Bottom
Clamp
(lower
notch)
Bottom
Clamp
(lower
notch)