Fisher & Paykel RS90A1 Refrigerator User Manual


  Open as PDF
of 1
 
DATE: 11.06.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(3/32''). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
INDICATES CAVITY CLEARANCES
ISO VIEW PROFILE VIEW
A
B
A
B
C
ALTERNATIVE INSTALLATION
900mm ActiveSmart™ Slide-in Refrigerator
Model no:
RS90A1
Custom Panel Dimensions
mm
a Height of bottom drawer panel
698
B Minimum height of toekick panel*
50
C Minimum depth of toekick panel
50
* The bottom drawer panel can be extended lower to cover the grille. However
in this installation scenario the product needs to be raised a minimum of
50mm from the floor to allow for adequate air supply.
Note: this alternative installation will cause some restriction of air supply so
the fridge will not be operating at it’s optimum energy performance levels.
Additional Part (Air Splitter) Dimensions
mm
D Overall height of block
80
E Overall width of block
120
F Overall depth of block
25
G Height from bottom of door panel to bottom of block*
5
H Distance from left edge of panel to centre of block**
360
* Presumes door panel height of 698mm
** Note measurement given from left when panel viewed from rear
Block to be manufactured and fitted by cabinetmaker., it can be construced
out of MDF or similar material
Bottom door panel and block need to be adequately sealed to withstand
moisture (50OC @ 80% RH). The back and sides of the panel should be
completely sealed with a waterproof vapour barrier (ie polyurethane) to
prevent damage to the panel
REAR VIEW OF BOTTOM PANEL
D
E
F
G
H
AIR SPLITTER BLOCK
OPTIMISES AIR FLOW IN
AND OUT OF GRILLE