Franke Consumer Products E 2M HD ASP Coffeemaker User Manual


  Open as PDF
of 1
 
© 2011 - Franke Coffee Systems Americas - This document is the confidential and proprietary property of Franke Coffee Systems Americas, and shall not be reproduced in any form of media
without the expressed written permission of a Franke Coffee Systems Americas representative. Due to continuous product development, Franke Coffee Systems Americas reserves the right to make
changes in design and specication without prior notice. REV 19Sep2011•G80005476FCG Evolution ASP Install guide• Under license of Franke Technology and Trademark, Ltd. Switzerland. Printed in U.S.A.
Franke Coffee Systems Americas
800 Aviation Parkway
Smyrna, TN USA 37167
Tel: 1 800 310 5710
Fax: 1 615 793 5940
email: fs-coffeesales.us@franke.com
www.us.franke-cs.com
EVOLUTION ASP
E 2M HD ASP
Unit Height Width Depth Ship weight Voltage/Phase/Cycle Wattage Amp Load Amp Circuit Plug Water line Water hardness Drain
Espresso
35”
890mm
13”
320mm
24”
600mm
135 lbs
61 kg
208-240/1/60 4800 24 A 30 A
NEMA
L6-30P
G 3/8” 1-5 gpg
16mm ID
vented
Floor drain
16mm (3/8”)
Vented drain
Cabinet
3/8” Braided stainless
steel cold water supply
line
Water filter
supplied with
espresso machine
Water and drain within 5’
10” of clearance
recommended
above grinder
(5” minimum)
2
1/2”
diameter hole
for utility lines
Receptacle
within 3’. Plug
is included with
machine.
13” wide
35”
high
All electrical and plumbing
must meet local codes
Please refer to specification
sheets for your machine
118” - 22”
Receptacle required
for espresso
L6-30R
1” minimum clearance
on sides and rear of
machine