Freestyle 599 Fitness Electronics User Manual


 
599 COACH PEDOMETER
INSTRUCTIONS
FEATURES:
• STEP COUNTER
• 5 STEP FILTER SENSOR
• DISTANCE CALCULATOR
• CALORIE COUNTER
• TIME AND DAY DISPLAY
• SPEED CALCULATOR
• WEEKLY MEMORY
KEY REFERENCES
SETTING THE OPERATING
SYSTEM
1. Decide first whether you wish to
work in Imperial or Metric system,
then press the MODE button so
that the upper display shows either
MILE or KM(not when in STEP
mode).
2. To change the system, press the
RESET button for 5 seconds until
the display changes to MILE or
KM as required.
3. All previously displayed readings
will be reset to zero.
INPUTTING YOUR STRIDE
LENGTH
Ranges- 1.0-7.0 feet(=12”-84”)
1. Walk or run a measured short
distance in feet or meters. Count
the number of steps taken, then
divide the distance by the number
of steps to calculate your stride
length. (Example: total distance
of 28 feet, divided by 8 steps
taken = strice length o 3.5 feet).
2. Alternatively, walk or jog a fixed
number of steps. (Example:
distance covered = 11 meters,
divided by 10 steps = stride length
of 1.1 meters = 110 cm)
3. Press the MODE button to reach
DIS/spd mode (display shows
either MILE/speed or KM/speed).
4. Press SET button and the upper
display shows the previous stride
input in F (feet) or CM
(centimeters).
5. Repeatedly pressing of the SET
button increases the input by .05
feet (.6”) or 1cm.
6. Press RESET button to decrease
the input
MANUALLY ZERO-SETTING THE
EXERCISE READINGS
1. Press RESET button for one
second; all trip records are reset to
zero. In TOTAL mode, all trip/day’s
and this week’s total records are
reset to zero.
2. Stride lentgh (feet or cm) and
weight (lbs or kg) as input will be
retained in memory.
RECALLING THIS WEEKS TOTAL
RECORDS
This pedometer has built in memory
to record weekly and total records.
1. When in chosen exerccise
reading mode, press TOTAL
button; this week’s ‘day’ markers
including today with TOTAL
appear. Upper and lower displays
show this weeks total record.
2. Press the TOTAL button again,
and the upper/lower displays
revert to the trip/day’s records.
RECALLING THE PREVIOUS
(LAST) WEEK’S RECODS
1. When in chosen exercise reading
mode press RECL; all ‘day’
markers appear. Upper display
shows recorded total of last week.
Lower display shows recorded
daily average of last week.
2. Press MODE button to cycle
through each mode.
3. Press RECL button again or walk
5 steps, the display will return to
the normal mode.
AUTOMATIC ZERO RESET
PLEASE NOTE: This unit has an
automatic zero function as follows:
1. At 2:00a.m. each day, all previous
day’s records (steps, distance, kcals,
timer) are reset automatically to zero
for the new day (total records are
not affected). The display is retained
until 5 steps taken.
2. At 2:00a.m. each Sun, the
previous week’s reading are reset
automatically to zero for the new
week, and records are tranferred to
last week.
POSITIONING YOUR DIGITAL
PEDOMETER
1. Use the clip on the back of your
pedometer to secure the unit to your
belt, or the top or your shorts or
pants.
2. For proper readings, it is important
to position the unit as close to your
hip area as possible.
3. Be sure that the pedometer is
parallel to the ground, as this will
aid in proper function, and allow
easy visual access to the display.
See drawing below:
After securing your digital pedometer
as indicated above, begin walking
or running. The “active” icon will
appear in the middle of the display
after 5 steps to let you know that
the pedometer is active and counting
your steps. The pedometer will
count steps while exercising in any
mode setting. The information from
your exercise will automatically be
recorded. The results may be
accessed at any time by pressing
the MODE button to view in the
various modes.
WARRANTY INFORMATION
Freestyle® products are warranted
to the original purchaser to be free
from defects in material and
workmanship under normal use for
a period of one year from the date
of purchase. During the warranty
period, and upon proof of purchase,
the product will be repaired or
replaced, without charge for either
parts or labor. The limited warranty
is given by Freestyle U.S.A. and not
the dealer from whom the product
was purchased.
Should the product be defective,
please return (postage paid) to:
Freestyle
Attn: Individual Return
47-50 33rd Street
Long Island City, NY. 11101
Include a brief description of the
problem, and a copy of your
purchase receipt showing it was
purchased within the past year.
Include your name, address and zip
code. Please allow 30 days for
return.
This warranty will not apply if product
has been misused, abused or
altered. Bending the unit and visible
cracking of the face or display are
presumed to be defects resulting
from misuse.
Neither this warranty nor any other
warranty, expressed or implied, or
any other warranties of
merchantability shall extend behind
the warranty period. No
responsibility is assumed for any
incidental or consequential
damages, including but not limited
to mathematical accuracy of the
product. Some states do not allow
limitations on how long an implied
warranty lasts. Some states do not
allow the exclusion or limit incidental
or consequential damage, so the
above limitations or exclusions may
not apply to you. The warranty gives
you specific legal rights, and you
may also have other rights which
vary from state to state.
Should this product require service
after the warranty has expired,
please return to the same address
as above and include a brief
description of the problem and a
check or money order for $15.00.
Please include your name, mailing
address, zip code and telephone
number. Please allow 30 days for
return.
Visit our website at:
www.freestyleusa.com
7. When your stride length is
accepted, the display returns to
DIS/spd mode after 3 seconds.
INPUTTING YOUR WEIGHT
Ranges 60 -300 lbs. or 30 -135 kg
1. Using a bathroom scale or similar,
determine your weight in lbs.
(Imperial) or kg. (Metric), without
clothing.
2. Press MODE button to reach
DIS/cal mode (display shows
either MILE/kcal o KM/kcal).
3. Press SET button; the lower
display shows the previous
weight input in L (lbs.) or kg.
4. Repeatedly pressing SET button
increases the input by 1 lb or
1 kg.
5. Press RESET button to decrease
the input.
SETTING THE CLOCK
1. Press MODE button to reach
DIS/clk mode (display shows
either MILE/clk or KM/clk).
2. Press SET button ; display shows
time to be adjusted.
3. Press reset button to advance
the “A”(AM) or “P”(PM) “hour”
digit by one hour.
4. Press SET button to advance the
minute digit by one minute.
5. Press RECL button to advance
the “day” marker by one weekday.
6. When the clock and weekday are
(correctly) set, the display returns
to the DIS/clk mode after 3
seconds.
READING THE DUAL DISPLAY
Press MODE button to cycle through
each of the following five exercise
trip/dat readings.
DIS/spd Upper display shows
distance travelled by 0.001
to 99.999 MILE or 99.999
KM.
Lower display shows
speed (average distance
per hour) in MPH or KPH.
DIS/cal Upper display shows
distance travelled by .001
to 99.999 MILE, or to
99.999 KM.
Lower display shows kcal
burned over distance
traveled.
DIS/clk Upper display shows
distance travelled by 0.001
to 99.999 MILE, or to
99.999 Km.
Lower display shows time
of day.
DIS/tmr Upper display shows
distance travelled by 0.001
to 99.999 MILE, or to
99.999 KM.
Lower display shows time
used during current
walk/run operation up to
100 hours.
STEP/spd Upper display shows
number of steps taken up
to 99,999 steps (excluding
irregular movements)
Lower display shows SPM
(average steps per minute)
during current walk/run
operation.
NOTE- In TOTAL mode (see below),
all upper/lower displays show this
week’s total of recorded measured
functions.
59904-1
UPPER DISPLAY
TOTAL
RECALL
SET
RESET
MODE
LOWER DISPLAY